Join 60,000+ competitive exam aspirants
ЁЭЬЖ1=___________ permeance of leakage flux path
Embedded winding's
Overhang winding's
Embedded winding's + Overhang winding's
None of these
Embedded winding's
In polyphase induction motors, the leakage flux is primarily categorized into slot, tooth-tip, zig-zag, and belt leakages, which collectively constitute the embedded winding leakage. The term ╬╗1тАЛ represents the specific permeance coefficient associated specifically with the embedded portion of the stator or rotor windings located within the core slots.
In polyphase induction motors, the leakage flux is primarily categorized into slot, tooth-tip, zig-zag, and belt leakages, which collectively constitute the embedded winding leakage. The term ╬╗1тАЛ represents the specific permeance coefficient associated specifically with the embedded portion of the stator or rotor windings located within the core slots.
╬╗1тАЛ=I╧И1тАЛтАЛ тАФ Represents the permeance coefficient for embedded conductors
╬╗=╬╗slotтАЛ+╬╗tipтАЛ+╬╗zigтИТzagтАЛ тАФ Total specific permeance of the embedded section
Leakage flux is the flux that does not participate in the air-gap energy conversion process, instead crossing the slot or surrounding the conductor. The permeance ╬╗ is defined as the ratio of flux linkage to current. For embedded conductors, the flux path is primarily restricted to the stator or rotor teeth and slot openings, calculated as ╬╗1тАЛ=╬╗slotтАЛ+╬╗zigzagтАЛ+╬╗beltтАЛ.
The total leakage reactance of an induction motor is the sum of embedded (stator/rotor) and overhang leakage.
Embedded leakage is independent of the coil pitch but depends on the slot geometry and winding distribution.
Overhang leakage is calculated separately using the permeance of the end-winding path.
The value of ╬╗1тАЛ directly impacts the sub-transient reactance of the machine.
Allows for precise estimation of starting current
Essential for calculating the leakage reactance XLтАЛ
Calculation requires complex geometric slot analysis
Saturation effects can make ╬╗1тАЛ non-linear
Design of squirrel cage induction motors
Calculation of torque-speed characteristics
Option B (Overhang winding's permeance) is represented by ╬╗2тАЛ or separate end-winding coefficients.
The embedded length is equal to the core length, whereas the overhang length is determined by the coil span and stator diameter.
A is correct тАФ The term ╬╗1тАЛ specifically denotes the permeance coefficient pertaining to the leakage flux paths of the embedded portion of the stator or rotor windings.
Always remember that leakage reactance is proportional to frequency; at standstill (rotor frequency = stator frequency), the leakage reactance dominates the impedance, limiting the starting current.