Join 60,000+ competitive exam aspirants
A JFET has three terminals, namely ______.
Cathode, anode, grid
Emitter, base, collector
Source, gate, drain
None
Source, gate, drain
A Junction Field-Effect Transistor (JFET) is a voltage-controlled unipolar semiconductor device consisting of three terminals: the Source, the Gate, and the Drain. It functions by controlling the width of the depletion region between the Gate and the channel, thereby regulating the flow of majority charge carriers between the Source and the Drain.
A Junction Field-Effect Transistor (JFET) is a voltage-controlled unipolar semiconductor device consisting of three terminals: the Source, the Gate, and the Drain. It functions by controlling the width of the depletion region between the Gate and the channel, thereby regulating the flow of majority charge carriers between the Source and the Drain.
IDтАЛ=IDSSтАЛ(1тИТVPтАЛVGSтАЛтАЛ)2 тАФ Shockley's equation for drain current in saturation
gmтАЛ=тИгVPтАЛтИг2IDSSтАЛтАЛ(1тИТVPтАЛVGSтАЛтАЛ) тАФ Transconductance of the JFET
In a JFET, current flows from the Source to the Drain through a conductive channel. A reverse bias voltage applied to the Gate terminal creates a depletion region that extends into the channel, reducing its cross-sectional area and increasing resistance. By modulating the Gate-to-Source voltage (VGSтАЛ), the device controls the Drain-to-Source current (IDтАЛ).
JFETs are unipolar devices, meaning current conduction depends on only one type of charge carrier (electrons in N-channel, holes in P-channel).
It is a voltage-controlled device, unlike BJTs which are current-controlled.
The input impedance of a JFET is extremely high because the gate-channel junction is reverse-biased.
High input impedance
Low noise operation
Better thermal stability than BJTs
Lower gain-bandwidth product compared to BJTs
High sensitivity to electrostatic discharge (ESD)
Low-noise amplifiers
Buffer stages in impedance matching
Voltage-controlled resistors
The BJT (Bipolar Junction Transistor) has terminals Emitter, Base, and Collector, which explains why Option B is incorrect.
The terms Anode, Cathode, and Grid are typically associated with vacuum tubes or diodes.
C is correct тАФ The three terminals of a JFET are Source, Gate, and Drain.
Always remember that JFETs are 'normally-ON' devices (Depletion mode), whereas MOSFETs can be 'normally-OFF' (Enhancement mode).