Join 60,000+ competitive exam aspirants
A shunt generator is running at 1000 rpm. If the flux is reduced by half, then what is the new speed such that generated voltage remains the same?
|
500
1000
2000
2000
The generated EMF in a DC generator is directly proportional to both the flux per pole and the rotational speed. Since the induced EMF must remain constant while the flux is halved, the speed must be doubled to compensate for the decrease in magnetic flux linkage.
The generated EMF in a DC generator is directly proportional to both the flux per pole and the rotational speed. Since the induced EMF must remain constant while the flux is halved, the speed must be doubled to compensate for the decrease in magnetic flux linkage.
EgтАЛ=60A╬жZNPтАЛ тАФ EMF equation of DC Generator
╬ж1тАЛN1тАЛ=╬ж2тАЛN2тАЛ тАФ Proportionality condition for constant voltage
The EMF equation for a DC generator is given by EgтАЛ=60A╬жZNPтАЛ. Here, EgтАЛ is the induced voltage, ╬ж is the flux, and N is the speed in rpm. Given EgтАЛ, Z, P, and A are constants for a specific machine, the relationship simplifies to EgтАЛтИЭ╬жN, implying ╬ж1тАЛN1тАЛ=╬ж2тАЛN2тАЛ. When ╬ж is halved (╬ж2тАЛ=0.5╬ж1тАЛ), the speed N2тАЛ must be 2N1тАЛ.
Induced EMF (EgтАЛ) is independent of current in an ideal scenario but dependent on flux and speed.
For a shunt generator, the terminal voltage is approximately equal to the generated EMF if IaтАЛRaтАЛ drop is neglected.
Halving the flux requires doubling the speed to maintain the same rate of flux cutting (Faraday's Law).
Wide range of speed control
Effective voltage regulation
Increased mechanical stress at higher speeds
Potential for commutator sparking at high speeds
Variable speed DC drives
Voltage control systems
The constant of proportionality includes machine-specific parameters like the number of poles (P), armature conductors (Z), and parallel paths (A).
Option B (500) is incorrect because reducing flux and speed simultaneously would result in a significant drop in voltage.
D is correct тАФ Since EgтАЛтИЭ╬жN, halving the flux (╬ж) requires the speed (N) to double to maintain a constant EgтАЛ.
Always verify if the machine parameters (Z, P, A) are constant before applying the proportionality relation NтИЭ╬ж1тАЛ for a fixed voltage.