Join 60,000+ competitive exam aspirants
A steam power plant is being supplied with coal having much more ash content than that for which it was designed. Which of its following units needs major modifications ?
Ash handling unit
Pulverizing unit
Condenser
Cooling towers
Ash handling unit
The ash handling unit is designed to process a specific volume of residue based on the coal's ash percentage. When coal with significantly higher ash content is used, the volumetric load on the ash removal system (conveyors, bunkers, and silos) exceeds its capacity, necessitating major structural or operational modifications.
The ash handling unit is designed to process a specific volume of residue based on the coal's ash percentage. When coal with significantly higher ash content is used, the volumetric load on the ash removal system (conveyors, bunkers, and silos) exceeds its capacity, necessitating major structural or operational modifications.
MashтАЛ=McoalтАЛ├Ч%Ash
CrequiredтАЛтЙеTcycleтАЛMashтАЛтАЛ
The furnace of a thermal power plant is sized based on the heating value and ash content of the fuel. High ash content coal increases the mass flow rate of non-combustible material, leading to rapid accumulation in the ash hoppers, increased wear on mechanical handling conveyors, and potential clogging of pneumatic ash disposal lines.
Increased ash content leads to excessive burden on the ash removal system.
Higher ash content reduces the boiler efficiency and increases the frequency of soot blowing.
Major modifications in coal feeders and ash handling plant are common when switching to lower-grade coal.
Pulverizers (Option B) also face higher wear rates but the ash handling system is the primary limiting factor in terms of volumetric throughput.
Ensures plant availability when switching coal sources
Prevents system blockages during high ash operation
High capital expenditure (CAPEX) for retrofitting
Extended plant downtime for modification
Retrofitting existing thermal plants for domestic coal usage
Upgrading aging plant infrastructure for fuel flexibility
Option B (Pulverizers) would experience significantly increased wear rates, but the Ash Handling Unit is explicitly bottlenecked by the physical mass balance constraints of the handling equipment.
The condenser and cooling tower are part of the heat rejection loop and are largely independent of the coal's ash content.
A is correct тАФ The ash handling unit requires modifications to manage the increased mass flow and volume of ash residue resulting from high-ash coal consumption.
Always evaluate whether a change in input fuel affects the chemical combustion side (Boiler/Efficiency) or the mechanical material flow side (Ash Handling/Coal Feeders).