Join 60,000+ competitive exam aspirants
A wire of a given material has length l and cross-sectional area A , and its resistance is 9 ╬й. Another wire of the same material has length l/3 and cross-sectional area 3A. What will be the resistance of the second wire?
0.5 ╬й
6 ╬й
2 ╬й
1 ╬й
1 ╬й
The resistance of a conductor is directly proportional to its length and inversely proportional to its cross-sectional area. By applying these changes proportionally, the new resistance is calculated as RnewтАЛ=R├ЧllnewтАЛтАЛ├ЧAnewтАЛAтАЛ=9├Ч11/3тАЛ├Ч31тАЛ=1╬й.
The resistance of a conductor is directly proportional to its length and inversely proportional to its cross-sectional area. By applying these changes proportionally, the new resistance is calculated as RnewтАЛ=R├ЧllnewтАЛтАЛ├ЧAnewтАЛAтАЛ=9├Ч11/3тАЛ├Ч31тАЛ=1╬й.
Think of a water pipe: making it shorter makes it easier for water to flow (less resistance), and making it wider also makes it easier for water to flow (less resistance); both changes significantly reduce the total resistance.
RARE: Resistance is proportional to Area and length (inversely to area, directly to length).
R=╧БAlтАЛ тАФ Ohm's law relation for a conductor, where ╧Б is resistivity, l is length, and A is area.
The resistance R of a wire is given by the formula R=╧БAlтАЛ, where ╧Б is the resistivity of the material. Since the material remains the same, ╧Б is constant. Substituting the new dimensions lтА▓=l/3 and AтА▓=3A into the formula, we get RтА▓=╧Б3Al/3тАЛ=91тАЛ(╧БAlтАЛ)=9RтАЛ.
Resistance is directly proportional to length (RтИЭl).
Resistance is inversely proportional to cross-sectional area (RтИЭA1тАЛ).
Resistivity (╧Б) depends only on the nature of the material and temperature, not dimensions.
Selection of wire gauges for electrical circuits.
Designing heating elements where higher resistance is required.
Original resistance R1тАЛ=9╬й.
Option B (6 ╬й) is incorrect as it ignores the multiplicative inverse effect of the area change.
Option C (2 ╬й) is incorrect due to calculation error in fraction handling.
D is correct тАФ The resistance decreases by a factor of 9 because the length is reduced to 1/3 and the area is increased by a factor of 3, leading to 9├Ч31тАЛ├Ч31тАЛ=1╬й.
Whenever dimensions change in these problems, always write the ratio RnewтАЛ/RoldтАЛ to cancel out the constant ╧Б immediately.