Join 60,000+ competitive exam aspirants
As per Betz criteria, maximum energy extracted by ideal wind turbine is
29% of that available in wind
39% of that available in wind
49% of that available in wind
59% of that available in wind
59% of that available in wind
The Betz limit, established by Albert Betz in 1919, represents the theoretical maximum efficiency at which an open-flow wind turbine can extract kinetic energy from the wind. It dictates that no wind turbine can capture more than 16/27 (approximately 59.3%) of the kinetic energy in the wind.
The Betz limit, established by Albert Betz in 1919, represents the theoretical maximum efficiency at which an open-flow wind turbine can extract kinetic energy from the wind. It dictates that no wind turbine can capture more than 16/27 (approximately 59.3%) of the kinetic energy in the wind.
CpтАЛ=PwindтАЛPextractedтАЛтАЛ=21тАЛ(1+v1тАЛv2тАЛтАЛ)(1тИТ(v1тАЛv2тАЛтАЛ)2) тАФ Power coefficient formula where v1тАЛ is upstream velocity and v2тАЛ is downstream velocity
Cp,maxтАЛ=2716тАЛтЙИ0.593 тАФ Maximum theoretical power coefficient (Betz Limit)
As wind passes through a turbine rotor, it must maintain a velocity to continue flowing downstream. If a turbine were to extract 100% of the energy, the wind would stop completely (velocity = 0) at the exit, preventing new wind from entering the rotor plane. The Betz limit is derived by optimizing the ratio of the wind speed at the rotor to the undisturbed wind speed, yielding the peak power coefficient CpтАЛ=2716тАЛтЙИ0.593.
The Betz limit is independent of the turbine design (e.g., number of blades or rotor type).
It assumes an ideal turbine without mechanical or electrical losses (100% aerodynamic efficiency).
Real-world modern turbines achieve 35% to 45% efficiency due to friction, wake turbulence, and drag.
Provides a theoretical benchmark for wind turbine performance.
Helps in evaluating the aerodynamic efficiency of different blade designs.
Does not account for non-ideal factors like tip losses or drag.
Applicable only to open-flow systems (not ducted or shrouded turbines).
Wind turbine design optimization.
Performance assessment in renewable energy power plant feasibility studies.
The limit occurs when the wind speed at the rotor is exactly 2/3 of the undisturbed upstream wind speed.
Option A, B, and C are incorrect as they represent values below the theoretical maximum defined by the Betz Limit.
D is correct тАФ The Betz limit states that an ideal wind turbine can extract a maximum of 59.3% of the kinetic energy available in the wind.
Always remember that the Betz limit is about kinetic energy extraction; actual power output is further reduced by generator and transmission efficiency (typically ~80-90%).