Join 60,000+ competitive exam aspirants
or with email
Your Cart
Subtotal₹0
Total₹0
Examoogle • User • info@examoogle.com • EE-2024-8821
Chapter 1 of 12 • Page 1 of 248🔒 Protected PDF • Watermarked
Join 60,000+ competitive exam aspirants
As per IS 4029:2010-Guide for Testing Three Phase Induction Motors. High Voltage test is generally performed at ____________ .
manufacturer premises
Third-Party premises
Consumer premises
None of these
manufacturer premises
Quick Summary: According to IS 4029:2010, the High Voltage (HV) test for induction motors is a routine test conducted at the manufacturer's premises to verify the integrity of the insulation system. This test ensures that the insulation can withstand overvoltages that may occur during service, typically applied between windings and the frame.
According to IS 4029:2010, the High Voltage (HV) test for induction motors is a routine test conducted at the manufacturer's premises to verify the integrity of the insulation system. This test ensures that the insulation can withstand overvoltages that may occur during service, typically applied between windings and the frame.
Vtest=2Vrated+1000V — Standard High Voltage test level for motors with rated voltage >100V
The HV test, or dielectric strength test, involves applying a voltage higher than the rated voltage (usually 2Urated+1000V for a duration of 1 minute) to the stator winding. If the insulation is sound, the leakage current remains negligible, indicating no breakdown; failure indicates a dielectric path defect.
High Voltage test is a routine dielectric test performed on every machine.
The test is mandated to be performed at the manufacturer's facility before dispatch.
It checks the insulation resistance against voltage surges.
The test is considered passed if no breakdown or flashover occurs during the specified duration.
Identifies insulation weaknesses during manufacturing stage.
Prevents early field failures due to defective insulation.
Destructive if performed incorrectly or if insulation is already weak.
Requires specialized high-voltage testing equipment.
Routine inspection of 3-phase induction motors.
Quality assurance for industrial rotating machinery.
IS 4029:2010 replaces older versions to align with international IEC standards for testing.
Performing this test at the consumer premises is generally not standard, as the factory environment provides controlled conditions and certified equipment.
A is correct — The High Voltage test is a standard routine test conducted at the manufacturer's premises to ensure insulation integrity before commissioning.
Always remember that 'Routine Tests' are typically performed by the manufacturer, whereas 'Type Tests' may involve external labs or design verification stages.