Join 60,000+ competitive exam aspirants
Belt conveyors can be employed for transporting coal at inclination upto
75┬░
60┬░
30┬░
15┬░
30┬░
Belt conveyors are mechanical systems designed for bulk material handling, such as coal in power plants. For standard belt conveyors, the maximum safe inclination is typically limited to 30┬░ to prevent material slippage and roll-back, depending on the material's angle of repose and friction coefficient.
Belt conveyors are mechanical systems designed for bulk material handling, such as coal in power plants. For standard belt conveyors, the maximum safe inclination is typically limited to 30┬░ to prevent material slippage and roll-back, depending on the material's angle of repose and friction coefficient.
FpтАЛ=mgsin╬╕ тАФ Parallel gravitational force tending to cause slide
FnтАЛ=mgcos╬╕ тАФ Normal force providing frictional grip
The conveyor operates via frictional drive between the belt and the material. As the angle of inclination increases, the component of gravitational force acting parallel to the belt surface (mgsin╬╕) increases, while the normal force (mgcos╬╕) decreases, reducing the effective grip. Beyond 30┬░, material instability and back-sliding usually require specialized high-angle conveying technology like chevron belts or bucket elevators.
Maximum inclination depends on the angle of repose of the coal.
Standard troughed belt conveyors are restricted to 15┬░ to 30┬░ for bulk coal.
Higher angles require cleats, chevrons, or sidewall belts to prevent rollback.
Belt conveyor efficiency decreases significantly as inclination exceeds the dynamic angle of repose.
High throughput capacity
Low power consumption per tonne of material
Continuous material handling
Limited inclination compared to elevators
Susceptible to belt wear and spillage
High initial capital investment for long distances
Thermal Power Plants for coal transportation
Mining and quarrying industries
Bulk material loading/unloading terminals
The friction between the belt and the coal depends on moisture content and coal size.
For loose, dry coal, angles are often restricted to the lower end of the 15┬░тИТ30┬░ range.
Option D (15┬░) is a common safe limit for very wet or fine material, but 30┬░ is the standard upper limit for general coal handling.
C is correct тАФ Standard belt conveyors used for coal transportation can typically handle inclinations up to 30┬░ effectively.
Always remember that in power plant engineering, conveyors are preferred for their continuous nature, whereas skip hoists or vertical elevators are used for vertical lifting where conveyors fail due to excessive inclination.