Join 60,000+ competitive exam aspirants
Breaking capacity of a circuit breaker is usually expressed in terms of
Volts
MW
Amperes
MVA
MVA
The breaking capacity of a circuit breaker is the maximum fault current that a circuit breaker can interrupt at a specified recovery voltage. It is expressed in MVA to account for both the current-interrupting capability and the system voltage level at which the interruption occurs.
The breaking capacity of a circuit breaker is the maximum fault current that a circuit breaker can interrupt at a specified recovery voltage. It is expressed in MVA to account for both the current-interrupting capability and the system voltage level at which the interruption occurs.
MVA=3тАЛ├ЧVLтАЛ├ЧIbreakingтАЛ тАФ The definition of breaking capacity in terms of power
During a fault, the circuit breaker must extinguish the arc generated between its contacts while carrying a massive short-circuit current. Since the power dissipated during the arc extinction process is proportional to the product of the fault current and the system voltage, the rating is defined as the three-phase power in MVA: MVAbreakingтАЛ=3тАЛ├ЧVLтАЛ├ЧIfaultтАЛ, where VLтАЛ is the rated line voltage and IfaultтАЛ is the rated symmetrical breaking current.
Breaking capacity is the maximum fault current a breaker can handle.
It is measured under specified standard conditions of recovery voltage.
It must be distinguished from 'Making Capacity', which is usually 2.55 times the symmetrical breaking current.
Provides a standardized metric independent of specific system impedance.
Helps in selecting circuit breakers suitable for specific short-circuit levels.
Does not account for the DC component of the fault current.
Dependent on the assumption of rated voltage at the time of fault.
Design of power distribution substations.
Switchgear selection in transmission networks.
Breaking capacity is primarily relevant for high-voltage and medium-voltage switchgear.
Option C (Amperes) defines the 'Rated Normal Current', not the breaking capacity.
Option A (Volts) is simply the insulation level or system operating voltage.
D is correct тАФ The breaking capacity represents the power handling capability of the breaker during a fault, expressed as the product of rated voltage and rated short-circuit current in MVA.
Remember that while normal current ratings are in Amperes, fault interrupting ratings (Breaking/Making capacity) are typically in MVA to facilitate easier coordination with transformer power ratings.