Join 60,000+ competitive exam aspirants
Bundle conductors are used in transmission lines, effective capacitance and inductance is respectively
Decreases and increase
Increases and decreases
Remains same and increases
Decrease and remain same
Increases and decreases
Bundle conductors involve using multiple conductors per phase instead of a single large conductor. This configuration effectively increases the Geometric Mean Radius (GMR) of the conductor, which results in an increase in effective capacitance and a decrease in effective inductance.
Bundle conductors involve using multiple conductors per phase instead of a single large conductor. This configuration effectively increases the Geometric Mean Radius (GMR) of the conductor, which results in an increase in effective capacitance and a decrease in effective inductance.
L=2├Ч10тИТ7ln(DsbтАЛDтАЛ) тАФ Inductance per meter of a bundled line
C=ln(reтАЛDтАЛ)2╧А╧╡тАЛ тАФ Capacitance per meter of a bundled line
The effective GMR (DsbтАЛ) of a bundled conductor is larger than that of a single conductor, effectively increasing the 'equivalent radius' of the phase. Inductance is inversely proportional to the logarithm of the GMR (LтИЭln(D/DsтАЛ)), so increasing GMR reduces inductance. Conversely, capacitance is directly proportional to the logarithm of the GMR (CтИЭ1/ln(D/reтАЛ)), so increasing the equivalent radius leads to an increase in capacitance.
Bundled conductors reduce the surface voltage gradient, thereby minimizing corona loss.
The surge impedance (ZcтАЛ=L/CтАЛ) of the transmission line decreases due to bundling.
Higher capacitance increases the charging current in long transmission lines.
Bundling is primarily used in Extra High Voltage (EHV) transmission lines.
Reduced corona loss
Reduced radio interference
Increased power transfer capability
Reduced inductive reactance
Higher wind loading on towers
Increased complexity in installation and maintenance
Higher cost due to more hardware and spacers
400 kV and 765 kV transmission networks
High Voltage Direct Current (HVDC) lines
The GMR of a bundled conductor is always larger than the GMR of a single conductor of the same cross-sectional area.
Option A is incorrect because inductance decreases, not increases.
Option C is incorrect because both parameters are affected by the geometry change.
Option D is incorrect because capacitance increases, not decreases.
B is correct тАФ Bundle conductors increase the equivalent radius (GMR), leading to an increase in effective capacitance and a decrease in effective inductance.
Remember that bundling effectively 'fattens' the conductor, which reduces its inductance but increases its capacitance to the ground/other phases.