Join 60,000+ competitive exam aspirants
Burning of low grade fuel can be improved by
Pulverizing
Blending with better quality coals
Oil assisted ignition
Any of above
Any of above
Low-grade coal, characterized by high ash and moisture content with a low calorific value, poses challenges for stable ignition and complete combustion in thermal power plants. To enhance the combustion efficiency of such fuel, various engineering techniques are employed to overcome ignition delays and incomplete burning.
Low-grade coal, characterized by high ash and moisture content with a low calorific value, poses challenges for stable ignition and complete combustion in thermal power plants. To enhance the combustion efficiency of such fuel, various engineering techniques are employed to overcome ignition delays and incomplete burning.
QnetтАЛ=QgrossтАЛтИТ1009H+WтАЛ├ЧL
SurfaceAreaтИЭd1тАЛ
1. Pulverizing increases the surface area-to-volume ratio of coal particles, allowing for rapid heating and quick ignition. 2. Blending improves the overall chemical composition, raising the average calorific value of the coal feed. 3. Oil-assisted ignition uses high-calorific fuel to establish a stable flame zone, facilitating the combustion of low-grade fuel when the furnace temperature is insufficient to sustain self-ignition.
Low-grade fuel typically has high moisture (often > 20%) and high ash content.
Pulverizing enables suspension firing, which mimics the behavior of gas.
Oil support acts as a pilot burner for coal ignition.
Blending is used to maintain a consistent furnace temperature.
Reduced ignition delay
Improved boiler thermal efficiency
Stabilized furnace conditions
High energy cost for coal mills
Additional cost of high-grade coal for blending
Increased operational complexity
Thermal power plants utilizing lignite or low-grade bituminous coal
Coal-fired industrial boilers
The primary goal of these methods is to maintain the furnace temperature above the ignition point of the fuel.
Pulverizing reduces the particle size to approximately 70 microns to ensure complete combustion.
D is correct тАФ All listed methods help in overcoming the high moisture and ash barriers to combustion, ensuring steady boiler performance.
Always remember that coal mills (for pulverizing) represent one of the most power-consuming auxiliaries in a thermal power plant.