Join 60,000+ competitive exam aspirants
Calorific values of coal largely depends upon
Ash content
Size of coal particles
Moisture content
Volatile matter
Ash content
The calorific value (CV) of coal is the total heat energy released during the complete combustion of a unit mass of fuel. Ash is a non-combustible inorganic residue that acts as a thermal diluent; therefore, as the percentage of ash increases, the energy content per unit mass of the coal sample decreases proportionately.
The calorific value (CV) of coal is the total heat energy released during the complete combustion of a unit mass of fuel. Ash is a non-combustible inorganic residue that acts as a thermal diluent; therefore, as the percentage of ash increases, the energy content per unit mass of the coal sample decreases proportionately.
CVтЙИ8080C+34500(HтИТO/8)+2240S тАФ Dulong's formula for calorific value in kcal/kg
QnetтАЛ=QgrossтАЛтИТ1009H+MтАЛ├ЧL тАФ Relation between gross and net calorific value
The total mass of coal is composed of combustible elements (Carbon, Hydrogen, Sulfur) and non-combustible ballast (Ash, Moisture). Since combustion heat is derived solely from the combustible fraction, an increase in ash content reduces the mass-fraction of fuel-producing constituents. The Dulong's formula demonstrates this dependency by showing CV is a function of the weight percentages of constituent elements.
Ash acts as a heat sink, absorbing sensible heat during combustion and reducing the net thermal output.
Higher ash content leads to increased handling costs and equipment wear in thermal power plants.
Coal quality is primarily graded based on its ash content and CV in Indian industries.
Ash content is determined by complete burning of coal in a muffle furnace at 750┬░C.
Lower ash content improves boiler efficiency.
High-grade coal minimizes the footprint of ash disposal sites.
High ash content leads to frequent boiler tube erosion and slagging.
Increased particulate emission (fly ash) requiring efficient ESPs.
Thermal Power Generation
Metallurgical industries (coking coal)
Moisture content also reduces CV, but ash is often the defining impurity in commercial coal classification.
Option B (Size of coal particles) affects the rate of combustion but does not change the intrinsic chemical energy stored within the coal mass.
Option D (Volatile matter) indicates the ease of ignition rather than the total thermal potential.
A is correct тАФ Ash is a non-combustible inorganic impurity; its presence displaces combustible matter, directly decreasing the calorific value of the fuel.
In Power System exams, always distinguish between Calorific Value (intrinsic energy content) and Combustion Efficiency (which depends on factors like particle size and air-fuel ratio).