Join 60,000+ competitive exam aspirants
Capacity of a transmission line can be increased by reducing
Line inductance
Line capacitance
Sending end voltage
Any of above
Line inductance
The power transfer capability of a transmission line is inversely proportional to its series reactance (XLтАЛ=2╧АfL). Reducing the line inductance (L) decreases the series reactance, thereby increasing the surge impedance loading (SIL) and the steady-state power transfer capability of the line.
The power transfer capability of a transmission line is inversely proportional to its series reactance (XLтАЛ=2╧АfL). Reducing the line inductance (L) decreases the series reactance, thereby increasing the surge impedance loading (SIL) and the steady-state power transfer capability of the line.
P=XLтАЛVSтАЛVRтАЛтАЛsin╬┤ тАФ Power transfer equation
XLтАЛ=2╧АfL тАФ Inductive reactance formula
The maximum power that a transmission line can transmit is governed by the formula P=XVSтАЛVRтАЛтАЛsin╬┤. By reducing the line inductance (L), we decrease the total series impedance (X=╧ЙL), which directly increases the power flow limit for a given phase angle difference ╬┤. Reducing inductance is physically achieved through techniques like bundle conductors, which increase the Geometric Mean Radius (GMR) of the phase.
Bundle conductors effectively reduce the GMR, lowering line inductance (L).
Lowering inductance enhances the transient and steady-state stability limits.
Inductance is primarily a function of conductor geometry and spacing.
Increased power transmission capability
Improved transient stability
Higher short circuit currents due to lower impedance
Increased complexity in tower design for bundling
EHV and UHV transmission lines
Long-distance power corridors
Option B is incorrect because increasing capacitance can lead to the Ferranti effect, affecting voltage regulation.
Standard techniques like series compensation also effectively reduce the net inductive reactance of a line.
A is correct тАФ Reducing line inductance lowers the series impedance, which directly increases the maximum power transfer capacity of the transmission line.
Always remember that in power systems, reducing series impedance (X) is the standard engineering approach to increase steady-state power capacity, whereas increasing shunt capacitance (C) is primarily used for voltage profile control.