Join 60,000+ competitive exam aspirants
Capacity of the underfeed stoker is in the range of
100 - 250 kg of coal burned per hour
100 - 500 kg of coal burned per hour
100 - 2000 kg of coal burned per hour
100 - 5000 kg of coal burned per hour
100 - 5000 kg of coal burned per hour
An underfeed stoker is a mechanical stoker where fresh coal is fed from below the fuel bed. The capacity of these stokers typically ranges from 100 kg/hr to 5,000 kg/hr, making them suitable for small-to-medium scale industrial steam boilers.
An underfeed stoker is a mechanical stoker where fresh coal is fed from below the fuel bed. The capacity of these stokers typically ranges from 100 kg/hr to 5,000 kg/hr, making them suitable for small-to-medium scale industrial steam boilers.
C=╬╖тЛЕm╦ЩcoalтАЛтЛЕHcvтАЛ тАФ Represents the heat output capacity of the boiler system where ╬╖ is efficiency, m╦ЩcoalтАЛ is the feed rate (kg/hr), and HcvтАЛ is the calorific value.
Coal is pushed by a ram or screw conveyor into a central retort located beneath the fuel bed. As fresh coal enters from the bottom, it is gradually heated, driving off volatile gases which burn as they pass through the incandescent fuel bed above, thereby minimizing smoke production and improving combustion efficiency.
Underfeed stokers are categorized as either single-retort or multiple-retort designs.
They are well-suited for bituminous and semi-bituminous coals.
The combustion process is semi-automatic and provides good control over steam pressure.
Capacity range of 100-5000 kg/hr covers standard boiler sizes for factory and light industrial use.
Smokeless operation due to bottom-feeding of coal.
Higher thermal efficiency compared to hand-firing.
Automatic fuel supply regulation based on steam demand.
Limited capacity compared to spreader stokers or pulverized coal systems.
Cannot handle coal with very high ash content efficiently.
Clinker formation can be an issue if the furnace temperature is not controlled.
Industrial process steam boilers.
Heating plants for large commercial buildings.
Small to medium scale power generation units.
Underfeed stokers are specifically designed to reduce air pollution by ensuring that volatile matter passes through the fire bed.
Option D represents the industry-standard range for commercial underfeed stokers used in steam generation.
D is correct тАФ The standard capacity of an underfeed stoker is between 100 kg/hr and 5,000 kg/hr.
In thermal power plant questions, always differentiate between 'stoker-fired' (small/medium) and 'pulverized-fuel' (large) boilers; pulverized systems are used for much higher capacities (> 50,000 kg/hr).