Join 60,000+ competitive exam aspirants
Commutator in DC generator is used for
collecting of current
reduce losses
increase efficiency
convert AC armature current in to DC
convert AC armature current in to DC
The commutator acts as a mechanical rectifier in a DC generator. Its primary function is to convert the alternating current (AC) induced in the armature conductors into unidirectional direct current (DC) in the external circuit.
The commutator acts as a mechanical rectifier in a DC generator. Its primary function is to convert the alternating current (AC) induced in the armature conductors into unidirectional direct current (DC) in the external circuit.
EgтАЛ=60AP╬жZNтАЛ тАФ Induced EMF in DC generator
IextтАЛ=тИСirectifiedтАЛ тАФ Unidirectional summation of currents
As the armature rotates in a magnetic field, the emf induced in the coil reverses direction every half-cycle (AC). The commutator segments rotate with the armature and, through sliding contact with stationary carbon brushes, ensure that the current extracted from the brushes always flows in the same direction, effectively performing full-wave rectification.
Commutator is made of hard-drawn copper segments insulated by mica.
The process of conversion is called commutation.
Without a commutator, a DC generator would effectively act as an alternator.
Carbon brushes are used for low friction and to assist in the commutation process.
Provides unidirectional supply for DC loads.
Enables simple control of output voltage characteristics.
Subject to mechanical wear and sparking.
Complexity in maintenance due to carbon brush degradation.
DC traction systems
Battery charging
Electrolytic processes
Option A (collecting current) is the function of the brushes, not the commutator specifically.
Commutator does not increase efficiency; rather, it introduces minor conduction and friction losses.
The segments are placed around the armature shaft and connected to the armature windings.
D is correct тАФ The commutator mechanically reverses the connections of the armature coils to the external circuit every half-cycle to produce a unidirectional DC output.
Always distinguish between the brush function (current collection) and commutator function (rectification) in exam questions to avoid simple errors.