Join 60,000+ competitive exam aspirants
Dielectric strength of rubber is about
10 kV/mm
20 kV/mm
30 kV/mm
100 kV/mm
30 kV/mm
The dielectric strength of rubber (typically vulcanized rubber) is approximately 30 kV/mm. This property defines the maximum electric field an insulating material can withstand without undergoing electrical breakdown or dielectric failure.
The dielectric strength of rubber (typically vulcanized rubber) is approximately 30 kV/mm. This property defines the maximum electric field an insulating material can withstand without undergoing electrical breakdown or dielectric failure.
E=dVbdтАЛтАЛ тАФ where E is dielectric strength, VbdтАЛ is breakdown voltage, and d is the thickness.
Dielectric strength refers to the voltage gradient (electric field intensity) that causes the insulation to lose its insulating property and become conductive. It is represented by the ratio of the breakdown voltage to the thickness of the insulation. When the applied potential gradient exceeds the material's atomic bond strength, electrons are pulled from their molecules, creating an electron avalanche effect that leads to a conductive path.
Dielectric strength is highly dependent on material purity, moisture content, temperature, and the frequency of the applied voltage.
Rubber is a classic elastomer used for cable insulation, though modern cables often use XLPE (Cross-linked Polyethylene) for higher thermal stability.
The SI unit for dielectric strength is V/m, but in power systems, kV/mm is the industry standard.
Good flexibility for cable bending
Effective insulation for low to medium voltage applications
Susceptible to ozone cracking and oxidation
Lower thermal limit compared to synthetic polymers like XLPE
Electrical insulation gloves
Rubber-insulated cables
Gaskets and seals for high-voltage equipment
The value 30 kV/mm is a nominal figure; pure rubber can range between 20-30 kV/mm depending on vulcanization grade.
Options 10 kV/mm and 20 kV/mm are underestimates, while 100 kV/mm is significantly higher than the dielectric strength of standard rubber.
C is correct тАФ The dielectric strength of rubber is approximately 30 kV/mm.
In competitive exams, always distinguish between Dielectric Strength (measured in kV/mm) and Resistivity (measured in Ohm-meters). Dielectric strength relates to the breakdown of insulation under voltage stress.