Join 60,000+ competitive exam aspirants
Drying of winding should be done during____________
Periodic maintenance
Preventive maintenance
Breakdown maintenance
Routine maintenance
Preventive maintenance
Drying of transformer windings is a preventive maintenance procedure performed to remove moisture absorbed by the solid cellulose insulation (paper/pressboard) of the transformer. This process ensures that the insulation resistance remains within safe limits, preventing dielectric breakdown and arcing during operation.
Drying of transformer windings is a preventive maintenance procedure performed to remove moisture absorbed by the solid cellulose insulation (paper/pressboard) of the transformer. This process ensures that the insulation resistance remains within safe limits, preventing dielectric breakdown and arcing during operation.
RinsтАЛтИЭM1тАЛ тАФ Insulation resistance is inversely proportional to the moisture content M
Moisture ingress in power transformers reduces the dielectric strength of the insulating oil and paper, leading to accelerated degradation. The drying process usually involves circulating hot, dry oil through the transformer or using vacuum drying techniques (heat and vacuum cycle) to evaporate and extract moisture from the winding insulation. By keeping the insulation dry, the insulation resistance RinsтАЛ is maintained at a high value, complying with international standards like IEEE or IEC.
Moisture in winding insulation leads to a significant decrease in dielectric breakdown voltage.
Drying is typically required if the measured insulation resistance (IR) values fall below recommended site values.
Common methods include hot oil circulation, vacuum treatment, and hot air drying.
Preventive maintenance schedules often dictate checking the moisture content via oil sampling.
Prevents catastrophic winding failures
Extends the operational life of the transformer insulation
Reduces the risk of internal flashovers
Requires taking the transformer out of service
Process is time-consuming and labor-intensive
Requires specialized drying equipment
Power Transformers
Distribution Transformers
Instrument Transformers
Drying is NOT part of 'Breakdown Maintenance' because the goal is to prevent the failure from occurring in the first place.
Routine maintenance often includes visual checks, whereas drying is performed based on specific diagnostic test results (e.g., IR test, Tan Delta test).
B is correct тАФ Drying of windings is classified under preventive maintenance because it is performed to maintain insulation health and avoid potential failure.
In transformer maintenance, always remember: Preventive maintenance is proactive (planned based on time or condition), while breakdown maintenance is reactive (fixing after failure).