Join 60,000+ competitive exam aspirants
During continuity test in an installation, the megger indicated reading is :
0 megohm
1 megohm
500 megohm
Infinity megohm
0 megohm
A continuity test aims to verify the presence of a low-resistance path in an electrical circuit. When a Megger is used for a continuity test on a healthy, continuous conductor, the instrument reads approximately 0 ╬й due to the minimal resistance of the wire.
A continuity test aims to verify the presence of a low-resistance path in an electrical circuit. When a Megger is used for a continuity test on a healthy, continuous conductor, the instrument reads approximately 0 ╬й due to the minimal resistance of the wire.
R=╧БAlтАЛ тАФ Resistance of a conductor of length l and area A
I=RtotalтАЛVтАЛ тАФ Ohm's Law governing the deflection mechanism
The Megger is essentially a high-resistance ohmmeter. During a continuity test, it applies a low voltage to the circuit. If the path is unbroken, the current flow is high, resulting in a deflection toward the zero position on the scale. If the circuit is broken or open, the resistance is nearly infinite, and the pointer remains at the 'Infinity' mark.
Continuity tests verify if a conductor path is unbroken.
A reading of 0 ╬й indicates a closed, low-resistance path.
A reading of infinity (тИЮ) indicates an open circuit (break in wire).
Meggers are typically used for insulation resistance measurement (M╬й) but can test continuity on low-resistance ranges.
Quickly identifies broken wiring in concealed installations.
Detects loose terminal connections.
Not suitable for testing high-precision low-value resistors.
Incorrect voltage selection may damage sensitive electronic components.
Wiring installation testing in residential buildings.
Verification of earthing continuity.
Cable integrity testing in industrial setups.
The Megger provides a high resistance scale (M╬й) for insulation testing and a low resistance scale for continuity.
Option D (Infinity) represents an open circuit, which is the opposite of a continuity test success.
A is correct тАФ A continuity test measures the resistance of a closed loop, and a reading of 0 ╬й confirms that the conductor is intact.
Remember that continuity tests look for RтЖТ0, while insulation resistance tests (Megger) look for RтЖТтИЮ to ensure safety.