Join 60,000+ competitive exam aspirants
Equalizer rings are used in which of the following?
lap winding
wave winding
both 1 and 2
none of the above
lap winding
Equalizer rings (or equipotential rings) are low-resistance copper rings used in lap-wound DC armatures to connect points that should be at the same potential. They are essential for ensuring current balance between parallel paths, preventing circulating currents and sparking at the brushes.
Equalizer rings (or equipotential rings) are low-resistance copper rings used in lap-wound DC armatures to connect points that should be at the same potential. They are essential for ensuring current balance between parallel paths, preventing circulating currents and sparking at the brushes.
IeqтАЛ=RpathтАЛ+2ReqтАЛE1тАЛтИТE2тАЛтАЛ тАФ current flow in equalizer circuit due to induced EMF imbalance
In a lap winding, multiple parallel paths exist. If there is a magnetic flux asymmetry due to eccentricity or uneven air gaps, the induced EMFs in parallel paths differ, creating large circulating currents through the brushes. Equalizer rings provide a low-resistance path between equipotential points of the armature winding, forcing the circulating currents to flow through the rings rather than the brush-commutator interface, thereby suppressing commutation sparking and reducing heating.
Equalizer rings are required only in lap windings because lap windings have as many parallel paths as there are poles (A=P).
They are connected to points that are exactly two pole pitches apart.
They help in achieving uniform current distribution among brushes.
They prevent excessive magnetic pull (unbalanced magnetic pull) on the rotor.
Reduces sparking at brushes by balancing parallel path currents.
Prevents unequal heating of windings.
Increases machine life by reducing wear on commutator and brushes.
Increases the cost and complexity of the armature construction.
Occupies additional space in the machine housing.
Large lap-wound DC generators.
DC motors where high-current performance is required.
| Feature | Lap Winding | Wave Winding |
|---|---|---|
Requirement | Required | Not Required |
Wave windings do not require equalizer rings because each parallel path consists of coils distributed under all poles, ensuring an inherent average EMF balance.
The number of equalizer rings usually ranges from 6 to 12 in large DC machines.
A is correct тАФ Equalizer rings are specifically used in lap-wound DC armatures to connect points of equal potential, thereby balancing parallel currents and preventing commutation sparking.
Remember that for lap windings A=P (large current, low voltage), while for wave windings A=2 (low current, high voltage). Only the former necessitates equalizer rings.