Join 60,000+ competitive exam aspirants
Flux density under trailing pole tips in case of generator will
increase
decrease
either increase or decrease
none of the above
increase
In a DC generator, the flux density under the trailing pole tips increases due to the effect of armature reaction. This occurs because the armature magnetomotive force (MMF) acts in opposition to the main field MMF at the leading pole tip and in the same direction at the trailing pole tip.
In a DC generator, the flux density under the trailing pole tips increases due to the effect of armature reaction. This occurs because the armature magnetomotive force (MMF) acts in opposition to the main field MMF at the leading pole tip and in the same direction at the trailing pole tip.
FarmтАЛ=IaтАЛтЛЕZaтАЛ
BtotalтАЛ=BfieldтАЛ┬▒BarmтАЛ
When a DC generator is loaded, current flows through the armature conductors, creating an armature MMF. This MMF is cross-magnetizing in nature. At the trailing pole tip (the direction towards which the armature rotates), the armature MMF and the main field MMF add up, resulting in higher flux density. Conversely, at the leading pole tip, they oppose each other, resulting in lower flux density.
Armature reaction causes cross-magnetization in DC machines.
Trailing pole tip experiences increased flux density due to additive MMFs.
Leading pole tip experiences decreased flux density due to subtractive MMFs.
Saturation at the trailing pole tip limits the overall increase in flux density.
Used to understand commutation limits
Helps in designing compensating windings
Causes sparking at brushes
Reduces terminal voltage
DC Generator design
Commutation analysis
The phenomenon where flux density is higher at one pole tip and lower at the other is known as distortion of the main field.
Option B is incorrect because it describes the flux density at the leading pole tip, not the trailing tip.
A is correct тАФ The armature reaction causes the MMFs to add up under the trailing pole tip, leading to an increase in flux density.
Always remember: in a generator, the flux density increases at the trailing tip; in a motor, the flux density increases at the leading tip.