Join 60,000+ competitive exam aspirants
For high head and low discharge the water turbine used is
Pelton wheel
Kaplan turbine
Francis turbine
Propeller turbine
Pelton wheel
The Pelton wheel is an impulse turbine specifically designed for high-head, low-discharge hydroelectric installations. It converts the potential energy of water into kinetic energy through nozzles, directing high-velocity jets onto buckets mounted on a runner.
The Pelton wheel is an impulse turbine specifically designed for high-head, low-discharge hydroelectric installations. It converts the potential energy of water into kinetic energy through nozzles, directing high-velocity jets onto buckets mounted on a runner.
NsтАЛ=H5/4NPтАЛтАЛ тАФ Specific speed formula used for turbine classification
P=╧БgQH╬╖ тАФ Power output equation where H is head and Q is discharge
Water is delivered through a penstock to a nozzle, which converts the high head into a high-velocity jet. This jet strikes the spoon-shaped buckets on the runner, causing it to rotate by changing the momentum of the water. Since the pressure at the inlet and outlet is atmospheric, the turbine operates under the impulse principle.
Pelton wheel is an impulse turbine where pressure remains constant at atmospheric pressure.
Specific speed for Pelton wheels is very low (typically 8 to 60 for single jet).
It is ideal for sites with head heights greater than 250 meters.
Efficiency is maintained even at part-load conditions due to needle valve governing.
Simple construction and ease of maintenance
High efficiency over a wide range of loads
No cavitation risk as it operates at atmospheric pressure
Requires very high head, limiting site selection
Large physical size for a given power output compared to reaction turbines
Efficiency drops significantly if head fluctuates
High-head mountainous hydroelectric power plants
Small scale micro-hydro projects with steep drops
| Feature | Pelton Wheel | Reaction Turbines |
|---|---|---|
Turbine Type | Impulse (Pelton) | Reaction (Francis/Kaplan) |
Head Requirement | High (>250m) | Low to Medium |
The Francis turbine is used for medium head and medium discharge.
The Kaplan turbine is used for low head and high discharge.
Specific speed (NsтАЛ) values define the turbine choice: Pelton (Low) < Francis (Medium) < Kaplan (High).
A is correct тАФ The Pelton wheel is an impulse turbine that operates efficiently under high head and low discharge conditions.
Remember that NsтАЛ is inversely proportional to head (H); thus, high head always correlates with low specific speed machines like the Pelton wheel.