Join 60,000+ competitive exam aspirants
For proper operation of the transistor, its collector should have ______.
Forward bias
Reverse bias
Small size
None
Reverse bias
For normal active operation of a bipolar junction transistor (BJT) as an amplifier, the emitter-base junction must be forward biased and the collector-base junction must be reverse biased. Reverse biasing the collector junction creates a high-electric-field depletion region that sweeps minority carriers from the base into the collector region.
For normal active operation of a bipolar junction transistor (BJT) as an amplifier, the emitter-base junction must be forward biased and the collector-base junction must be reverse biased. Reverse biasing the collector junction creates a high-electric-field depletion region that sweeps minority carriers from the base into the collector region.
IEтАЛ=IBтАЛ+ICтАЛ тАФ Emitter current relation in a transistor
ICтАЛ=╬▒IEтАЛ+ICBOтАЛ тАФ Collector current in terms of alpha and reverse saturation current
ICтАЛ=╬▓IBтАЛ+(1+╬▓)ICBOтАЛ тАФ Collector current relation using common-emitter current gain
In an NPN transistor operating in the active region, the forward-biased emitter-base junction injects electrons into the thin base region. Because the base is narrow and lightly doped, most of these injected electrons diffuse across it without recombining and reach the collector-base depletion region. The reverse bias across the collector-base junction sets up a strong electric field that collects these electrons and draws them into the collector terminal, producing the collector current.
In Active Region: Emitter-Base Junction is Forward Biased, Collector-Base Junction is Reverse Biased.
The collector region is moderately doped and physically larger than the emitter to dissipate heat generated by reverse-bias power dissipation.
Reverse bias at the collector junction accelerates minority carriers from the base into the collector.
Provides linear amplification of signals in the active operating region.
Ensures high output impedance, making the collector behave as a controlled current source.
High reverse bias voltage increases heat dissipation at the collector-base junction.
Excessive reverse bias voltage can cause avalanche breakdown at the collector junction.
Used in linear voltage and current amplifiers.
Used in active filter circuits and signal processing stages.
Cut-off Region: Both Emitter-Base and Collector-Base junctions are reverse biased.
Saturation Region: Both Emitter-Base and Collector-Base junctions are forward biased.
Reverse Active Region: Emitter-Base junction is reverse biased and Collector-Base junction is forward biased.
Option A (Forward bias) at the collector puts the transistor into the saturation region rather than active amplifier operation.
Option C (Small size) is incorrect because the collector region is physically larger than both the base and emitter to handle higher thermal dissipation.
B is correct тАФ For proper active amplifier operation of a BJT, the collector-base junction must be reverse biased to effectively sweep charge carriers into the collector region.
Always identify the biasing conditions of both junctions first: EB forward + CB reverse = Active mode (Amplifier); both forward = Saturation (ON switch); both reverse = Cut-off (OFF switch).