Join 60,000+ competitive exam aspirants
Galloping in transmission line conductor arises due to
Asymmetrical layers of ice formation
Vortex phenomenon in light winds
Heavy weight of the line conductors
Adoption of horizontal current configuration
Asymmetrical layers of ice formation
Galloping in transmission line conductors is a low-frequency, high-amplitude oscillation phenomenon caused by aerodynamic instability. It primarily occurs when ice accumulates asymmetrically on the conductor, transforming its cross-section into an airfoil shape.
Galloping in transmission line conductors is a low-frequency, high-amplitude oscillation phenomenon caused by aerodynamic instability. It primarily occurs when ice accumulates asymmetrically on the conductor, transforming its cross-section into an airfoil shape.
fnтАЛ=2LnтАЛmTтАЛтАЛ тАФ Natural frequency of the transmission line span
FLтАЛ=21тАЛ╧Бv2DCLтАЛ тАФ Lift force acting on the conductor
The asymmetric ice layer creates a non-circular aerodynamic profile. When wind blows across this shape, it induces lift and drag forces that vary with the conductor's angle of attack. If the mechanical properties of the conductor (tension, span, damping) permit, the energy extracted from the wind overcomes the damping forces, resulting in self-excited vertical or elliptical oscillations at the fundamental natural frequency.
Galloping is characterized by large amplitude (up to several meters) and low frequency (0.1 to 3 Hz).
Den Hartog criterion is often used to predict the potential for galloping based on the slope of the lift coefficient curve.
Commonly observed in long spans with light to moderate winds (typically 10-50 km/h).
Transmission lines with horizontal configuration are more prone to phase-to-phase faults during galloping compared to vertical configurations.
Mechanical damage to hardware, insulators, and cross-arms.
Risk of flashover due to reduced mid-span clearance between conductors.
Fatigue failure of conductor strands.
Option B (Vortex shedding) refers to 'Aeolian vibration', which occurs at higher frequencies (5-100 Hz) and lower amplitudes.
Prevention methods include using torsional dampers, ice-melting techniques, or adding 'detuning pendulums' to change the torsional properties of the conductor.
A is correct тАФ Galloping is primarily triggered by the aerodynamic lift forces generated due to the asymmetric shape of ice-laden conductors.
Distinguish between 'Galloping' (low frequency, high amplitude, ice-related) and 'Aeolian Vibration' (high frequency, low amplitude, wind-shedding related) to avoid confusion in power system exams.