Join 60,000+ competitive exam aspirants
Generation of one watt needs about ______fission per second.
1├Ч106
1├Ч107
1├Ч1010
1├Ч1010
To generate 1 Watt of electrical power from a nuclear reactor, approximately 3├Ч1010 fissions per second are required. This value is derived from the energy released per fission event, which is approximately 200┬аMeV per nucleus of 235U.
To generate 1 Watt of electrical power from a nuclear reactor, approximately 3├Ч1010 fissions per second are required. This value is derived from the energy released per fission event, which is approximately 200┬аMeV per nucleus of 235U.
P=n├ЧEfтАЛ
n=EfтАЛPтАЛ
The energy released per fission is about 200┬аMeV, where 1┬аeV=1.602├Ч10тИТ19┬аJ. Thus, one fission yields 200├Ч106├Ч1.602├Ч10тИТ19тЙИ3.2├Ч10тИТ11┬аJ. Since 1┬аWatt=1┬аJoule/second, the number of fissions required per second is calculated by dividing 1┬аJ/s by the energy per fission, resulting in approximately 3imes1010 fissions/sec. The provided option 1├Ч1010 is the standard order of magnitude used in introductory nuclear power engineering.
Energy released per fission of U235 is approximately 200┬аMeV.
1 Watt is equal to 1┬аJoule/second.
Nuclear power plants rely on chain reactions to maintain this continuous rate of fission.
Actual efficiency of conversion to electrical energy is typically 30-35%, requiring even higher effective fission rates.
High energy density compared to chemical fuels.
Minimal greenhouse gas emissions during operation.
Radioactive waste management challenges.
High capital cost for reactor infrastructure.
Base load power generation in nuclear power plants.
Nuclear-powered marine propulsion.
The value 1├Ч1010 is an approximation; precise calculations often cite 3.12├Ч1010 fissions/s per Watt.
Option B (1├Ч106) and Option C (1├Ч107) are too low by several orders of magnitude to sustain power generation.
D is correct тАФ The required rate for 1 Watt of thermal power production in a nuclear fission reactor is approximately 1010 fissions per second.
Always remember the conversion factor 1┬аeV=1.602├Ч10тИТ19┬аJ as it is foundational for both Physics and Electrical Engineering power calculations.