Join 60,000+ competitive exam aspirants
Horizontal axis rotor in a windmill is made of
Only lift devices
Only drag devices
Either (a) or (b)
None of above
Either (a) or (b)
Horizontal axis wind turbines (HAWT) can operate using either aerodynamic lift or drag forces to capture wind energy. While modern large-scale turbines primarily utilize lift due to higher efficiency, traditional or specific low-speed designs may rely on drag, making both mechanisms applicable.
Horizontal axis wind turbines (HAWT) can operate using either aerodynamic lift or drag forces to capture wind energy. While modern large-scale turbines primarily utilize lift due to higher efficiency, traditional or specific low-speed designs may rely on drag, making both mechanisms applicable.
L=21тАЛ╧Бv2ACLтАЛ тАФ Aerodynamic lift force where CLтАЛ is the lift coefficient
D=21тАЛ╧Бv2ACDтАЛ тАФ Aerodynamic drag force where CDтАЛ is the drag coefficient
In lift-based devices, the airfoil shape of the blade creates a pressure difference between the upper and lower surfaces, generating a perpendicular force that drives rotation. In drag-based devices, the wind pushes directly against the surface of the blade or vane, moving it in the direction of the wind flow, which is typically less efficient but simpler to implement.
Most modern HAWTs are high-speed lift devices designed for high power coefficients.
Drag devices (like Savonius types, though usually VAWT) are characterized by lower rotational speeds and higher torque.
The rotor blade geometry is the primary factor determining whether the device relies on lift or drag.
Lift devices offer significantly higher tip-speed ratios (TSR).
Drag devices are structurally simpler and easier to start at low wind speeds.
Lift devices require precise blade profiles and are sensitive to wind angle of attack.
Drag devices suffer from high parasitic losses and material usage relative to power output.
Utility-scale power generation (Lift)
Water pumping and small-scale mechanical work (Drag/Hybrid)
| Feature | Lift Device | Drag Device |
|---|---|---|
Force Principle | Pressure differential | Wind resistance |
Lift-based turbines are designed for high-speed operation, often reaching tip-speed ratios of 5-7.
Drag-based systems are often used for small, low-power applications due to the low aerodynamic efficiency.
C is correct тАФ Horizontal axis rotors can be engineered to utilize either lift-based aerodynamics or drag-based impulse, depending on the specific design requirements.
Always remember that in electrical power generation from wind, maximizing the Tip Speed Ratio (TSR) is essential for efficiency, which is why lift-based blades are preferred in modern 3-blade HAWTs.