Join 60,000+ competitive exam aspirants
If a transformer has 50 primary turns and 10 secondary turns. What is the reflective resistance of the secondary load resistance (250 тДж)?
25
6250
250
62500
6250
The reflected resistance of a secondary load in a transformer is determined by the square of the turns ratio. Given a primary turns count N1тАЛ=50 and secondary turns count N2тАЛ=10, the transformation ratio k=N2тАЛN1тАЛтАЛ=5.
The reflected resistance of a secondary load in a transformer is determined by the square of the turns ratio. Given a primary turns count N1тАЛ=50 and secondary turns count N2тАЛ=10, the transformation ratio k=N2тАЛN1тАЛтАЛ=5.
a=N2тАЛN1тАЛтАЛ тАФ Turns Ratio
RpтАЛ=a2├ЧRsтАЛ тАФ Impedance Reflection Formula
The transformer impedance transformation property relies on the relation RpтАЛ=a2├ЧRsтАЛ, where a=N2тАЛN1тАЛтАЛ is the turns ratio. When a load RsтАЛ is connected to the secondary, the source on the primary side sees an equivalent resistance RpтАЛ scaled by the square of the turns ratio due to the change in voltage and current levels.
The primary resistance RpтАЛ is directly proportional to the square of the turns ratio a2.
For step-down transformers (N1тАЛ>N2тАЛ), the reflected resistance is significantly higher than the actual load resistance.
This concept is crucial for impedance matching in electronic circuits and power electronics.
Allows for maximum power transfer through impedance matching.
Enables coupling of different voltage levels while maintaining load characteristics.
Requires high precision in turns ratio for accurate impedance reflection.
Transformer non-idealities like leakage reactance can affect actual reflected impedance.
Audio amplifier output stages.
Radio frequency (RF) impedance matching circuits.
Calculation: a=50/10=5. Then RpтАЛ=52├Ч250=25├Ч250=6250╬й.
Option A (25) is the square of the turns ratio, not the final resistance. Option C (250) is the original load resistance. Option D (62500) ignores the correct calculation of the turns ratio squared.
B is correct тАФ The reflected resistance is calculated as RpтАЛ=(N1тАЛ/N2тАЛ)2├ЧRsтАЛ, which evaluates to 52├Ч250=6250╬й.
Always remember that resistance is scaled by the square of the ratio (a2), whereas voltage is scaled linearly by (a).