Join 60,000+ competitive exam aspirants
If field current is decreased in a shunt dc motor, the speed of the motor
remains the same
increases
decreases
none of the above
increases
In a shunt DC motor, the speed is inversely proportional to the flux per pole. When the field current is decreased, the flux produced by the field winding also decreases, which causes the motor speed to increase to satisfy the back EMF equation.
In a shunt DC motor, the speed is inversely proportional to the flux per pole. When the field current is decreased, the flux produced by the field winding also decreases, which causes the motor speed to increase to satisfy the back EMF equation.
N=KbтАЛ╬жVтИТIaтАЛRaтАЛтАЛ тАФ General speed equation for DC motors
╬жтИЭIfтАЛ тАФ Relationship between flux and field current in the linear region
The speed of a DC motor is governed by the relation NтИЭ╬жEbтАЛтАЛ. Since EbтАЛ=VтИТIaтАЛRaтАЛ (which remains approximately constant for a given voltage and load), reducing the field current IfтАЛ reduces the magnetic flux ╬ж. Consequently, the motor must increase its speed N to maintain the required back EMF balance.
Field weakening is a common method for achieving speeds above rated speed.
The shunt motor exhibits constant speed characteristics, but field current adjustment allows for speed control.
Decreasing field current too much can lead to unstable high-speed operation (overspeeding).
Efficient speed control above rated speed
No additional power loss in the armature circuit
Reduced starting torque at higher speeds
Risk of dangerous overspeed if field circuit opens
Adjustable speed drives
Industrial machinery requiring variable speed operation
This phenomenon is known as 'Field Weakening' control.
Option C is incorrect because decreasing flux always increases speed in DC motors, provided the voltage remains constant.
B is correct тАФ Decreasing the field current reduces the magnetic flux, which forces the motor speed to increase to maintain equilibrium in the back EMF equation.
Always remember that in DC motors, speed is inversely proportional to flux; therefore, any reduction in field excitation results in an increase in rotational speed.