Join 60,000+ competitive exam aspirants
If secondary numbers of turns in a transformer increases, the secondary output voltage of the transformer
decreases.
increases.
remains the same.
decreases slightly.
increases.
The secondary output voltage of a transformer is directly proportional to the number of turns in its secondary winding. Increasing the secondary turns (NsтАЛ) while keeping the primary voltage (VpтАЛ) and primary turns (NpтАЛ) constant results in a higher induced voltage on the secondary side.
The secondary output voltage of a transformer is directly proportional to the number of turns in its secondary winding. Increasing the secondary turns (NsтАЛ) while keeping the primary voltage (VpтАЛ) and primary turns (NpтАЛ) constant results in a higher induced voltage on the secondary side.
VpтАЛVsтАЛтАЛ=NpтАЛNsтАЛтАЛ тАФ Transformer voltage ratio formula
VsтАЛ=NsтАЛdtd╬жтАЛ тАФ Faraday's Law applied to the secondary winding
According to Faraday's Law of Induction, the induced EMF in a coil is proportional to the number of turns linked by the magnetic flux. Since the magnetic flux produced by the primary winding is shared with the secondary through the transformer core, the voltage per turn remains constant. Thus, VsтАЛ=NsтАЛ├Ч(volts┬аper┬аturn), confirming that VsтАЛ increases linearly with NsтАЛ.
Transformers operate on the principle of mutual induction.
The ratio of secondary voltage to primary voltage is equal to the ratio of secondary turns to primary turns.
In a step-up transformer, NsтАЛ>NpтАЛ, leading to VsтАЛ>VpтАЛ.
Efficient voltage level adjustment
Provides galvanic isolation between circuits
Fixed frequency operation
Weight and size increase with higher turn counts
Power transmission and distribution grids
Electronic power supplies and adapters
This relationship holds true for an ideal transformer where flux leakage is negligible.
Option A is incorrect because increasing secondary turns increases, not decreases, the secondary EMF.
Option C is incorrect because the output voltage is dependent on the turn ratio.
B is correct тАФ The secondary output voltage increases because it is directly proportional to the number of secondary turns (NsтАЛ) according to the transformer EMF equation.
Always remember the mnemonic 'V-N-T': Voltage is proportional to the Number of turns. If you increase the turns, you increase the voltage capacity of that winding.