Join 60,000+ competitive exam aspirants
If the height of transmission towers is increased, which of the following parameters is likely to change ?
Resistance
Inductance
Capacitance
None of the above
Capacitance
Increasing the height of a transmission tower increases the distance between the transmission conductors and the ground (the return path). Since capacitance in a transmission line is fundamentally determined by the geometric configuration of conductors relative to the ground plane, changing this height alters the system capacitance.
Increasing the height of a transmission tower increases the distance between the transmission conductors and the ground (the return path). Since capacitance in a transmission line is fundamentally determined by the geometric configuration of conductors relative to the ground plane, changing this height alters the system capacitance.
C=ln(r2hтАЛ)2╧А╧╡0тАЛтАЛ тАФ Capacitance of a single conductor above ground plane
XcтАЛ=2╧АfC1тАЛ тАФ Capacitive reactance of the line
The transmission line forms a capacitor with the ground acting as one plate and the conductors as the other. The capacitance C for a single conductor at a height h above the ground is given by C=ln(2h/r)2╧А╧╡0тАЛтАЛ, where h is the height and r is the radius of the conductor. Increasing h increases the denominator, which results in a decrease in the overall capacitance per unit length of the line.
Capacitance is defined by the physical geometry of the conductor arrangement.
Higher towers lead to a decrease in shunt capacitance relative to ground.
Resistance and Inductance depend primarily on conductor material, length, and cross-section, not height from the ground.
Reduced capacitance at higher heights helps decrease charging current in long transmission lines.
Lower charging current for long lines
Improved dielectric stress management at ground level
Higher tower cost due to structural requirements
Increased susceptibility to lightning strikes
Extra High Voltage (EHV) line design
Reduction of corona loss via geometric optimization
Resistance is R=╧БAlтАЛ, depending on material and length.
Inductance is primarily determined by conductor geometry and spacing between phases.
Option A and B are incorrect because they are independent of the distance from the ground plane.
C is correct тАФ Increasing the tower height changes the geometric configuration of the conductor-to-ground system, thereby modifying the shunt capacitance.
Always remember that shunt parameters (capacitance/conductance) are influenced by the environment/ground, while series parameters (resistance/inductance) are intrinsic to the conductor properties.