Join 60,000+ competitive exam aspirants
If the spacing between two phase conductor increases, the line capacitance
Decreases
Increases
Remains same
Not affected
Decreases
The capacitance of a transmission line is inversely proportional to the logarithm of the ratio of spacing between conductors to the radius of the conductors. Therefore, as the spacing (D) between phase conductors increases, the line capacitance decreases.
The capacitance of a transmission line is inversely proportional to the logarithm of the ratio of spacing between conductors to the radius of the conductors. Therefore, as the spacing (D) between phase conductors increases, the line capacitance decreases.
C=ln(D/r)2╧А╧╡0тАЛтАЛ тАФ Capacitance to neutral per unit length for a single-phase two-wire line
CnтАЛ=log10тАЛ(D/r)0.0242тАЛ╬╝F/km тАФ Practical formula for capacitance calculation
Capacitance in a transmission line is defined by the ability of conductors to store charge when a potential difference is applied. The formula for the capacitance to neutral (CnтАЛ) of a two-wire line shows that CnтАЛ depends on the spacing D and conductor radius r. As D increases, the denominator of the logarithmic term increases, causing the overall capacitance value to drop.
Capacitance is defined by the geometry of the conductors and the permittivity of the medium.
Increasing spacing (D) reduces the flux linkage per unit charge, thereby reducing capacitance.
Higher capacitance leads to higher charging current, which is often undesirable in long lines.
Transmission lines are designed considering capacitance effects on voltage profile (Ferranti effect).
Higher spacing allows for higher operating voltages due to better insulation
Reduces the risk of corona discharge by lowering surface electric field stress
Reduced capacitance increases the Ferranti effect in light-load or no-load conditions
Increases tower structure dimensions, leading to higher material costs
Design of EHV (Extra High Voltage) transmission towers
Calculation of power system charging current and reactive power compensation
Option B is incorrect because capacitance follows an inverse logarithmic relationship with spacing.
The effect of spacing on capacitance is relatively small due to the logarithmic nature of the formula, but mathematically it is a decrease.
A is correct тАФ The line capacitance decreases because it is inversely proportional to the logarithm of the ratio of spacing between conductors to the radius of the conductor.
Always remember that while inductance increases with spacing (logarithmically), capacitance decreases with spacing. This relationship is fundamental to understanding the surge impedance ZcтАЛ=L/CтАЛ of lines.