Join 60,000+ competitive exam aspirants
In a dc machine, 4 pole lap winding is used. The number of parallel paths is?
In a DC machine, the number of parallel paths (A) for a lap winding is always equal to the number of poles (P). Therefore, for a 4-pole lap-wound machine, there are 4 parallel paths.
In a DC machine, the number of parallel paths (A) for a lap winding is always equal to the number of poles (P). Therefore, for a 4-pole lap-wound machine, there are 4 parallel paths.
A=P тАФ Number of parallel paths equals number of poles for lap winding
A=2 тАФ Number of parallel paths for wave winding regardless of poles
In lap winding, the finish end of one coil is connected to the start of the adjacent coil under the same pole. This construction effectively connects all conductors under a specific pole in a path that parallels other similar groups, resulting in A=P. This winding style is typically used for low-voltage, high-current applications.
Lap winding is also known as multiple or parallel winding.
It produces a high current, low voltage machine design.
The EMF generated in each parallel path is identical, preventing internal circulating currents.
Suitable for high current capacity requirements
Easier for brush placement at multiple points around the commutator
Requires more copper for equal voltage output compared to wave winding
Requires equalizer rings for large machines to balance circulating currents
Electroplating generators
High-current DC motors used in industrial drives
| Feature | Lap Winding | Wave Winding |
|---|---|---|
Parallel Paths (A) | A = P | A = 2 |
Lap winding provides as many parallel paths as there are poles, making it inherently suited for high current density.
Wave winding, by contrast, always provides only 2 parallel paths, making it suitable for high voltage and low current requirements.
A is correct тАФ For any lap-wound DC machine, the number of parallel paths is always equal to the number of poles, which is 4 in this case.
Always verify if the question specifies 'Lap' (A=P) or 'Wave' (A=2) winding; ignoring this distinction is the most common cause of error in DC machine problems.