Join 60,000+ competitive exam aspirants
In a nuclear reactor thermal energy is obtained from
Fission of radioactive materials
Fusion of radioactive materials
Burning of the fuel rods in oxygen
None of above
Fission of radioactive materials
Nuclear reactors generate thermal energy through the controlled fission of heavy nuclei, primarily Uranium-235 or Plutonium-239. When these nuclei absorb a neutron, they split into smaller daughter nuclei, releasing a significant amount of kinetic energy and additional neutrons that sustain the chain reaction.
Nuclear reactors generate thermal energy through the controlled fission of heavy nuclei, primarily Uranium-235 or Plutonium-239. When these nuclei absorb a neutron, they split into smaller daughter nuclei, releasing a significant amount of kinetic energy and additional neutrons that sustain the chain reaction.
Q=╬ФmтЛЕc2 тАФ Total energy released during a fission event
E=nfтАЛтЛЕEfтАЛ тАФ Total power output based on fission rate (nfтАЛ) and energy per fission (EfтАЛ)
The principle relies on the Einstein mass-energy equivalence, E=╬Фmc2. In a nuclear reactor, the mass of the products of fission is slightly less than the mass of the parent nucleus and the incident neutron. This 'mass defect' (Deltam) is converted into thermal energy, which is then transferred to a coolant (water or gas) to produce steam and drive a turbine.
Nuclear fission is a process where heavy isotopes split into lighter ones.
The energy released per fission is approximately 200 MeV.
A chain reaction is maintained by the secondary neutrons produced.
Thermal energy generated is converted to electrical energy via Rankine cycle.
High energy density compared to fossil fuels.
Minimal greenhouse gas emissions during operation.
Generation of long-lived radioactive waste.
High capital cost and risk of catastrophic accidents (meltdown).
Base load electricity generation.
Nuclear-powered marine propulsion (submarines/carriers).
Nuclear Fusion (Option B) currently is not used for power generation due to the extreme temperature and pressure requirements (plasma confinement).
Burning fuel rods (Option C) is a chemical reaction, not a nuclear reaction, and would be insufficient to provide the energy densities required for power reactors.
A is correct тАФ Nuclear reactors utilize the heat generated by the controlled fission of radioactive materials like Uranium-235.
Always distinguish between fission (splitting, currently used) and fusion (joining, experimental) in Power System exams to avoid negative marking.