Join 60,000+ competitive exam aspirants
In a power plant a reserve generating capacity which is in operation but not in service is called
Cold reserve
Hot reserve
Spinning reserve
Firm reserve
Hot reserve
A hot reserve is a generating unit that is kept running at rated speed or idling, connected to the busbar but not carrying any load. It serves as a rapid-response capacity that can be synchronized or loaded immediately to meet sudden increases in demand.
A hot reserve is a generating unit that is kept running at rated speed or idling, connected to the busbar but not carrying any load. It serves as a rapid-response capacity that can be synchronized or loaded immediately to meet sudden increases in demand.
RhotтАЛ=PmaxтАЛтИТPgenтАЛ тАФ represents the available capacity from spinning/hot units
In a power system, hot reserves are maintained in a 'ready-to-load' state. Because the turbine is already at operating temperature and the unit is synchronized (or idling), the time required to ramp up to full load is significantly shorter compared to cold reserve units, which require time for boiler startup and synchronization.
Hot reserve units consume fuel to maintain operating temperature even when no load is supplied.
They provide 'spinning reserve' functionality when synchronized to the grid.
This strategy is expensive due to continuous fuel consumption and thermal losses without power output.
It is crucial for maintaining grid frequency stability during sudden load spikes.
Extremely fast response to load changes.
Prevents system collapse during sudden outages of other units.
High operating cost due to idling fuel consumption.
Increased wear and tear on machinery compared to cold units.
Load frequency control.
Backup for intermittent renewable energy sources.
Peak load management.
| Feature | Cold Reserve | Hot Reserve |
|---|---|---|
Status | Inoperative | Operational/Idling |
Response Time | Slow (Hours) | Fast (Minutes/Seconds) |
Cold reserve refers to units that are shut down and require a significant time for startup (boiler firing).
Spinning reserve is specifically the capacity connected to the grid and synchronized, which is a subset of hot reserve.
B is correct тАФ Hot reserve represents a generating unit that is idling or running but not actively supplying power to the load, allowing it to be brought online almost instantaneously.
Always distinguish between 'Hot Reserve' (idle but at temperature) and 'Spinning Reserve' (synchronized to the grid); while often used interchangeably, Spinning Reserve strictly implies connection to the electrical grid.