Join 60,000+ competitive exam aspirants
In ACSR conductor, insulation between aluminum and steel conductor is
Betumin
Varnish
Insulin
No insulation required
No insulation required
ACSR (Aluminum Conductor Steel Reinforced) conductors are composite conductors where a central steel core provides mechanical strength and the surrounding aluminum strands provide conductivity. No insulation is required between the aluminum and the steel because both are metallic conductors intended to operate at the same electrical potential, and they are in direct physical contact to allow current sharing (though most current flows through the aluminum due to lower resistance).
ACSR (Aluminum Conductor Steel Reinforced) conductors are composite conductors where a central steel core provides mechanical strength and the surrounding aluminum strands provide conductivity. No insulation is required between the aluminum and the steel because both are metallic conductors intended to operate at the same electrical potential, and they are in direct physical contact to allow current sharing (though most current flows through the aluminum due to lower resistance).
RACSRтАЛ=RAlтАЛ+RStтАЛRAlтАЛ├ЧRStтАЛтАЛ тАФ Equivalent resistance of the composite conductor
ITotalтАЛ=IAlтАЛ+IStтАЛ тАФ Total current distribution in ACSR
The steel core acts as the internal mechanical support to bear the tensile stress, while the outer aluminum layers serve as the primary path for current flow. Since both materials are conductors and are maintained at the same potential, the interface between them does not form a voltage difference; thus, insulating the interface is unnecessary and would serve no electrical purpose.
The steel core provides high tensile strength, allowing for longer spans and reduced sag.
Aluminum is used for its excellent conductivity-to-weight ratio.
There is no chemical or electrical requirement for insulation between the core and the strands.
The steel core is galvanized to prevent corrosion due to galvanic action between dissimilar metals.
High mechanical strength for long transmission spans
High conductivity with lightweight design
Reduced sag compared to pure aluminum conductors
Galvanic corrosion can occur if moisture penetrates the strands
More complex manufacturing compared to all-aluminum conductors
High Voltage (HV) transmission lines
Extra High Voltage (EHV) transmission lines
Long-span distribution networks
ACSR is the industry standard for overhead transmission lines globally.
The term 'Insulin' in option C is clearly a distractor as it refers to a hormone, not an electrical insulation material.
D is correct тАФ No insulation is required between the aluminum strands and the steel core of an ACSR conductor because they are both metallic and operate at the same potential.
Always remember that in composite power conductors, electrical insulation is only applied externally (via air or specific insulation coating) to isolate the conductor from the tower/ground, never between the internal strands of the same conductor.