Join 60,000+ competitive exam aspirants
In DC generators brushes are used for
collecting of current without any sparkings
collecting of voltage
reduce eddy current loss
convert ac armature current into dc
collecting of current without any sparkings
In DC generators, carbon brushes are used to facilitate the collection of electrical current from the rotating commutator to the external circuit. Their primary functional requirement is to provide a low-resistance sliding contact that allows for smooth, continuous current collection while minimizing mechanical wear and electrical arcing.
In DC generators, carbon brushes are used to facilitate the collection of electrical current from the rotating commutator to the external circuit. Their primary functional requirement is to provide a low-resistance sliding contact that allows for smooth, continuous current collection while minimizing mechanical wear and electrical arcing.
IaтАЛ=ILтАЛ+IfтАЛ тАФ Armature current relationship in DC generator
EgтАЛ=60A╬жZNPтАЛ тАФ Generated EMF equation
As the armature rotates, the induced AC EMF is rectified into DC by the mechanical commutator. The carbon brushes press against the commutator segments to collect this current. During the commutation process (when a coil enters or leaves the brush contact region), brushes help in reversing the current direction within the armature coils. Proper brush material choice (typically carbon-graphite) ensures high contact resistance to facilitate rapid current reversal, which is essential to minimize spark generation.
Brushes are typically made of carbon-graphite due to their self-lubricating property and high contact resistance.
The contact resistance of carbon helps in reducing the spark during the commutation process.
Proper brush pressure is critical; too little causes sparking, while too much causes excessive mechanical wear.
Brushes must be positioned at the Magnetic Neutral Axis (MNA) to minimize sparking.
Carbon-graphite material provides a thin, high-resistance film on the commutator surface.
Self-lubricating properties reduce mechanical noise and wear.
High contact resistance leads to some voltage drop at the brushes.
Brushes require periodic inspection and replacement due to mechanical friction.
DC generators
DC motors (for power transfer to armature)
Option D is often confused with the purpose of the brush; while brushes assist in the process, the conversion of AC to DC is fundamentally performed by the commutator itself, with brushes acting as the collector/interface.
Brushes help 'commutation', which is the process of reversing the current as the coil passes the MNA.
A is correct тАФ Brushes are essential for collecting the DC output current while maintaining physical contact with the rotating commutator segments with minimal sparking.
Always remember: The Commutator converts AC to DC; the Brushes merely act as the sliding electrical bridge to extract that current.