Join 60,000+ competitive exam aspirants
In dc machine armature windings are placed on rotor because of the necessity for
electromechanical energy conversion
generation of voltage
commutation
development of torque
commutation
In a DC machine, the armature winding must be placed on the rotor to facilitate the process of commutation. Commutation is the process of reversing the direction of current in the armature coils as they pass through the magnetic neutral axis (MNA) to ensure unidirectional torque or voltage.
In a DC machine, the armature winding must be placed on the rotor to facilitate the process of commutation. Commutation is the process of reversing the direction of current in the armature coils as they pass through the magnetic neutral axis (MNA) to ensure unidirectional torque or voltage.
EgтАЛ=60AP╬жZNтАЛ тАФ EMF equation of DC generator
TaтАЛ=2╧А1тАЛтЛЕAP╬жZIaтАЛтАЛ тАФ Torque equation of DC motor
The DC machine uses a mechanical rectifier known as a commutator and brushes. Since the armature coils carry AC internally, they must be connected to a rotating commutator fixed on the shaft. By placing the armature on the rotor and using stationary brushes, the commutator segments maintain contact with the external circuit, converting AC in the coils to DC at the terminals.
The commutator rotates with the rotor, making it necessary to have the armature on the moving part.
Commutation requires precise alignment of brushes with the MNA to prevent sparking.
If the armature were on the stator, the commutator would need to be a complex sliding mechanism across the entire circumference, which is mechanically unfeasible.
Allows simple mechanical rectification
Enables compact design of the rotor assembly
Requires high maintenance due to brush wear
Limits maximum speed due to mechanical centrifugal forces on the commutator
DC generators for power supply
DC motors for variable speed traction and industrial drives
Option A is incorrect as energy conversion occurs regardless of whether the armature is on the rotor or stator (as in AC machines).
Option B is incorrect because voltage is generated via relative motion (Faraday's Law), not by the specific placement of the winding.
Option D is incorrect because torque is developed in both rotors and stators of electric machines.
C is correct тАФ The commutator requires the armature coils to be on the rotating member to mechanically convert the alternating current generated in the windings into direct current.
Always remember that the commutator is essentially a mechanical inverter/rectifier; its physical attachment to the rotor shaft is the primary reason the armature must be the rotating part.