Join 60,000+ competitive exam aspirants
In reaction turbine, the function of draft tube is to
Reduce water hammer
Increase flow rate of water
Convert kinetic energy of water to potential energy by a gradual expansion in divergent part
None of above
Convert kinetic energy of water to potential energy by a gradual expansion in divergent part
The draft tube is a divergent conduit connecting the turbine runner exit to the tailrace. Its primary function is to recover a significant portion of the kinetic energy present in the water leaving the runner, converting it into pressure energy.
The draft tube is a divergent conduit connecting the turbine runner exit to the tailrace. Its primary function is to recover a significant portion of the kinetic energy present in the water leaving the runner, converting it into pressure energy.
HdтАЛ=(2gV12тАЛтИТV22тАЛтАЛ)тИТhfтАЛ тАФ Draft head recovery formula where V1тАЛ is inlet velocity, V2тАЛ is outlet velocity, and hfтАЛ is friction loss
As water flows through the divergent section of the draft tube, the cross-sectional area increases gradually. According to the continuity equation (A1тАЛV1тАЛ=A2тАЛV2тАЛ), the velocity decreases as area increases. By Bernoulli's principle, this reduction in velocity results in an increase in pressure at the turbine outlet, effectively increasing the net head acting on the turbine and improving overall efficiency.
Allows the turbine to be set above the tailrace level without losing head.
Prevents cavitation by maintaining pressure above vapor pressure.
Increases the efficiency of reaction turbines like Francis or Kaplan.
The diverging angle is usually kept small (around 5┬░ to 8┬░) to prevent flow separation.
Increases net effective head
Improves turbine efficiency
Allows flexible installation height of the turbine
Susceptible to flow separation if divergence angle is too large
Increases structural complexity and civil engineering cost
Francis Turbines
Kaplan Turbines
Pumped Storage Plants
The draft tube allows the turbine to be installed at a height above the tailrace level, which is crucial for inspection and maintenance.
Option A is incorrect because water hammer is controlled by surge tanks or governors, not the draft tube. Option B is incorrect as flow rate is determined by the turbine gate/vane opening.
C is correct тАФ The draft tube converts the excess kinetic energy of water leaving the turbine runner into static pressure energy through gradual expansion.
In competitive exams, remember that draft tubes are exclusive to reaction turbines; impulse turbines (like Pelton wheels) operate at atmospheric pressure and do not require them.