Join 60,000+ competitive exam aspirants
In single-phase induction motor. The required phase displacement between the running and starting windings current is obtained by __________ in series with starting winding.
connecting a suitable resistor
connecting a suitable capacitor
connecting a suitable inductor
connecting a suitable impedance
connecting a suitable impedance
A single-phase induction motor is not self-starting because its single-phase stator winding produces a pulsating magnetic field rather than a rotating one. To produce a rotating magnetic field and start the motor, the single-phase supply must be split into two phases by adding an auxiliary (starting) winding in space quadrature with the main winding. Placing a suitable impedance in series with the starting winding causes the currents in the two windings to be phase-shifted relative to each other, creating the required starting torque.
IS 996:2009
A single-phase induction motor is not self-starting because its single-phase stator winding produces a pulsating magnetic field rather than a rotating one. To produce a rotating magnetic field and start the motor, the single-phase supply must be split into two phases by adding an auxiliary (starting) winding in space quadrature with the main winding. Placing a suitable impedance in series with the starting winding causes the currents in the two windings to be phase-shifted relative to each other, creating the required starting torque.
╧ДstтАЛтИЭImтАЛIstтАЛsin╬▒ тАФ Starting torque produced in split-phase motor
╬▒=╬╕mтАЛтИТ╬╕stтАЛ тАФ Phase angle displacement between main and starting winding currents
ZstтАЛ=RstтАЛ+jXstтАЛ тАФ Total impedance connected in series with auxiliary winding
According to the double-revolving field theory, a pulsating magnetic field can be decomposed into two equal and oppositely rotating magnetic fields. At standstill, both fields produce equal and opposite torques, resulting in zero net starting torque. By inserting an impedance (such as a resistance, capacitance, or inductance) into the starting winding branch, the phase angle of the starting current changes relative to the main winding current. This creates an unbalanced two-phase system that produces a net unidirectional rotating magnetic field to start the motor.
An auxiliary impedance ZstтАЛ creates a temporal phase difference ╬▒ between ImтАЛ and IstтАЛ.
The maximum starting torque is obtained when the phase angle difference ╬▒=90┬░.
The generic term for the phase-shifting element connected in series with the starting winding is 'impedance', which covers resistors, capacitors, or inductors.
A centrifugal switch disconnects the starting winding branch when the motor reaches approximately 75% to 80% of synchronous speed.
Enables self-starting capability in inherently non-self-starting single-phase motors.
Allows flexibility in choosing specific impedance types (resistance, capacitance) based on required starting torque and cost constraints.
Consumes extra space and adds cost due to auxiliary winding and phase-splitting impedance.
If resistive impedance is used, starting torque is relatively low and power loss during starting is higher.
Resistance-split phase motors: Small fans, blowers, centrifugal pumps.
Capacitor-start motors: Compressors, conveyors, refrigerators, hard-to-start heavy loads.
Connecting a resistor (Option A) creates a resistance split-phase motor, yielding moderate starting torque with ╬▒тЙИ30┬░.
Connecting a capacitor (Option B) creates a capacitor-start motor, providing high starting torque with ╬▒тЙИ90┬░.
Impedance (Option D) is the most comprehensive and general technical term that encompasses resistance, capacitance, or inductance.
D is correct тАФ Connecting a suitable impedance in series with the starting winding provides the necessary phase difference between main and starting winding currents to produce a starting torque.
For competitive exams like GATE and SSC JE, remember that 'impedance' is the general requirement for phase split, while 'capacitor' gives the highest starting torque per ampere because it brings the phase angle ╬▒ closest to 90┬░.