Join 60,000+ competitive exam aspirants
In the DC machine shape of the main field, flux distribution is?
triangular
flat tapped or trapezoidal
saddle shape
peaky in nature
flat tapped or trapezoidal
In a DC machine, the flux density distribution in the air gap under the pole faces is flat-topped or trapezoidal. This shape is achieved due to the physical geometry of the stator poles and the intentional tapering of the pole shoes to distribute the magnetic flux evenly across the armature surface.
In a DC machine, the flux density distribution in the air gap under the pole faces is flat-topped or trapezoidal. This shape is achieved due to the physical geometry of the stator poles and the intentional tapering of the pole shoes to distribute the magnetic flux evenly across the armature surface.
B(╬╕)=lgтАЛ╬╝0тАЛFfтАЛтАЛ тАФ Basic relation for flux density under the pole where lgтАЛ is the air gap length.
╬ж=тИлBdA тАФ Total flux calculation integrating density over the pole area.
The flux distribution is governed by the reluctance of the air gap. Since the air gap length is relatively constant under the pole face, the flux density remains uniform, resulting in the 'flat' top of the trapezoid. Near the pole edges, the reluctance increases due to fringing effects, causing the flux density to decrease, which forms the sloped sides of the trapezoidal profile.
The flat-topped waveform is desired to produce a constant induced EMF per conductor as it moves through the pole region.
The transition at the edges is due to magnetic fringing.
Armature reaction causes the distribution to become distorted from this ideal trapezoidal shape under load.
Provides uniform induced voltage in armature conductors.
Minimizes torque pulsation in the machine.
Ideal trapezoidal shape is hard to maintain under heavy armature reaction.
Fringing flux can lead to increased iron losses at pole tips.
Design of DC Motors
Design of DC Generators
Analysing Commutation process
A perfectly sinusoidal distribution is typically found in cylindrical rotor synchronous machines, whereas DC machines specifically utilize the trapezoidal shape.
Option A (triangular) describes flux distribution in specific unsaturated small motors; Option C (saddle shape) represents a highly distorted field due to cross-magnetizing armature reaction.
B is correct тАФ The main field flux distribution in a DC machine is flat-topped or trapezoidal due to the design of the pole shoes which ensures a constant air gap.
Always remember that the trapezoidal distribution assumes no-load conditions; under load, armature reaction shifts and distorts this profile, leading to the necessity of interpoles.