Join 60,000+ competitive exam aspirants
In transmission line, distributed constants are
Resistance and shunt conductance only
Resistance and inductance only
Resistance, inductance and capacitance
Resistance, inductance, capacitance and shunt conductance
Resistance, inductance, capacitance and shunt conductance
A transmission line is modeled as a network of distributed parameters because these properties are not concentrated at specific points but are spread uniformly along the entire length of the conductor. These primary constants define the electrical performance of the line, including attenuation, phase shift, and characteristic impedance.
A transmission line is modeled as a network of distributed parameters because these properties are not concentrated at specific points but are spread uniformly along the entire length of the conductor. These primary constants define the electrical performance of the line, including attenuation, phase shift, and characteristic impedance.
Z0тАЛ=G+j╧ЙCR+j╧ЙLтАЛтАЛ тАФ Characteristic Impedance of a transmission line
╬│=(R+j╧ЙL)(G+j╧ЙC)тАЛ тАФ Propagation Constant
Distributed constants are independent of the line length as they are expressed per unit length (e.g., ╬й/km).
For power frequency transmission lines, the shunt conductance G is often very small and sometimes neglected in simplified calculations, but it is physically present.
These parameters are fundamental for deriving the telegrapher's equations.
Allows for accurate modeling of long lines where lumped parameter approximations fail.
Enables calculation of voltage and current standing waves.
Mathematical complexity increases significantly compared to lumped parameter analysis.
Requires partial differential equations for time-domain analysis.
Power system steady-state analysis.
High-frequency communication lines.
Fault location and transient stability studies.
In short transmission lines (<80 km), parameters are often assumed to be lumped for convenience.
Option A, B, and C are incorrect because they are incomplete descriptions of the physical properties governing electrical transmission.
D is correct тАФ A transmission line is characterized by four primary distributed parameters: Resistance, Inductance, Capacitance, and Shunt Conductance.
Always remember that G (shunt conductance) accounts for leakage current, which becomes non-negligible at very high voltages or when insulators are contaminated.