Join 60,000+ competitive exam aspirants
In transmission lines, the cross-arms are made of
Steel
Wood
R.C.C
Either Steel or Wood
Steel
In transmission lines, cross-arms are the horizontal structural components mounted on poles or towers used to support insulators and conductors. Steel is the preferred material for these cross-arms due to its superior mechanical strength, durability, and ability to handle the tension and weight of power conductors in high-voltage lines.
In transmission lines, cross-arms are the horizontal structural components mounted on poles or towers used to support insulators and conductors. Steel is the preferred material for these cross-arms due to its superior mechanical strength, durability, and ability to handle the tension and weight of power conductors in high-voltage lines.
FbendingтАЛ=IWLтАЛ тАФ Represents the bending stress induced in a cross-arm, where W is load, L is length, and I is the moment of inertia.
TallowableтАЛтЙеFmaxтАЛ тАФ The condition that the allowable tensile strength of the steel must exceed the maximum operational load.
The mechanical design of a transmission tower must withstand wind pressure and the tension of conductors. Steel cross-arms act as cantilever beams that transfer the mechanical loads from the insulators to the main tower body. Because they are conductive, they must be properly coordinated with insulation string design to prevent flashovers to the grounded tower structure.
Steel cross-arms provide high resistance to environmental factors compared to wood.
They are standardized in various shapes such as channels, angles, or I-beams.
Galvanization is essential for steel cross-arms to prevent corrosion in outdoor environments.
Wooden cross-arms are generally restricted to low-voltage distribution lines.
High mechanical strength-to-weight ratio
Long service life and low maintenance
Resistant to termites, fire, and rot
Susceptible to corrosion if not properly coated
Heavier than treated wood alternatives
Requires grounding to maintain safety
High voltage transmission towers
Sub-transmission systems
Industrial substation structures
| Feature | Transmission | Distribution |
|---|---|---|
Material | Steel | Wood |
Wood cross-arms are common in older distribution networks but are unsuitable for high-tension transmission due to structural limits.
R.C.C (Reinforced Cement Concrete) is rarely used for cross-arms due to brittleness and excessive weight.
A is correct тАФ Steel is the industry standard for transmission line cross-arms due to its high structural integrity and ability to support heavy conductor loads.
Always remember that while wood is used in distribution, transmission lines require the superior tensile strength of galvanized steel to manage large sag and conductor tensions.