Join 60,000+ competitive exam aspirants
In water turbines, the runaway speed of Pelton wheel is
8 to 1.9 times rated speed
2 to 2.2 times rated speed
5 to 3 times rated speed
Full load speed
8 to 1.9 times rated speed
The runaway speed of a turbine is the maximum speed attained by the runner when the load on the turbine is suddenly removed and the governor mechanism fails to regulate the water flow. For a Pelton wheel, this speed typically ranges from 1.8 to 1.9 times its rated speed.
The runaway speed of a turbine is the maximum speed attained by the runner when the load on the turbine is suddenly removed and the governor mechanism fails to regulate the water flow. For a Pelton wheel, this speed typically ranges from 1.8 to 1.9 times its rated speed.
NrunтАЛтЙИ1.8тИТ1.9├ЧNratedтАЛ тАФ Empirical relationship for Pelton wheel runaway speed
Under normal operating conditions, the turbine speed is controlled by the governor adjusting the needle valve. If load rejection occurs and the control system fails, the water flow remains at its maximum. As the turbine accelerates, the relative velocity of the jet changes until the torque produced equals the mechanical losses, establishing a new, high-speed steady state known as runaway speed.
Runaway speed must be accounted for in the mechanical design of the generator rotor.
The generator and turbine shaft must withstand the centrifugal stresses at this maximum speed.
Pelton wheels exhibit runaway speeds significantly higher than reaction turbines like Kaplan or Francis.
Failure of the governing mechanism is the primary cause of runaway conditions.
The rated speed is the speed at which the turbine delivers maximum efficiency at the design head and flow.
Option B (2 to 2.2 times) is often cited as a conservative design limit for generator safety, but 1.8-1.9 is the standard performance value for Pelton turbines.
A is correct тАФ The runaway speed of a Pelton wheel is typically 1.8 to 1.9 times its rated speed, representing the maximum speed reached upon sudden load rejection with failure of the governing system.
Always remember that runaway speed is a safety-critical parameter; mechanical engineers design the rotor balancing based on this value rather than the operational rated speed.