Join 60,000+ competitive exam aspirants
______________ is an unspliced connection used to connect the equipment grounding conductor and the service disconnect enclosure to the grounded conductor of a power system.
Main bonding jumper
Grounding electrode conductor
Equipment grounding conductor
Ground electrode
Main bonding jumper
The main bonding jumper is a critical component in electrical grounding systems that provides the necessary path for ground-fault current to return to the source. It physically connects the equipment grounding conductor and the service-disconnect enclosure to the grounded (neutral) conductor, ensuring that the overcurrent protection device (circuit breaker or fuse) can trip during a ground fault.
The main bonding jumper is a critical component in electrical grounding systems that provides the necessary path for ground-fault current to return to the source. It physically connects the equipment grounding conductor and the service-disconnect enclosure to the grounded (neutral) conductor, ensuring that the overcurrent protection device (circuit breaker or fuse) can trip during a ground fault.
IfaultтАЛ=ZloopтАЛVLNтАЛтАЛ тАФ Determines the fault current magnitude through the bonding path, where ZloopтАЛ is the total impedance.
During a ground fault, current flows from the ungrounded conductor to the enclosure. Because the enclosure is bonded to the neutral (grounded conductor) via the main bonding jumper, a low-impedance circuit is created back to the power source. This high fault current flow forces the circuit breaker to operate, thus de-energizing the fault and preventing electric shock.
The main bonding jumper must be unspliced to ensure minimal impedance.
It is usually found at the service equipment or a separately derived system.
It creates a 'solidly grounded' system by linking the neutral to ground at the service entrance.
Without this jumper, the enclosure would remain energized at line voltage during a ground fault.
Ensures rapid tripping of overcurrent devices
Stabilizes voltage levels relative to ground
Increases potential for stray currents if neutral is bonded at multiple locations downstream
Requires proper sizing to withstand potential fault current levels
Service entrance equipment
Separately derived systems (transformers)
Main distribution panels
Per NEC Article 250.24(B), a main bonding jumper is required to connect the equipment grounding conductor(s) and the service-disconnect enclosure to the grounded conductor within the service equipment.
Option B (Grounding Electrode Conductor) connects the grounded system or enclosure to the grounding electrode itself, not the neutral bus to the enclosure.
Option C (Equipment Grounding Conductor) is the path from equipment back to the panel, not the specific link between neutral and ground at the service.
A is correct тАФ The main bonding jumper provides the low-impedance path required for ground-fault current to return to the source, enabling overcurrent protection operation.
Always distinguish between the 'Main Bonding Jumper' (service side) and 'System Bonding Jumper' (separately derived systems) as both serve the same function but apply to different parts of the network.