Join 60,000+ competitive exam aspirants
Lowest speed wind turbines are mainly driven by
Drag force
Lift force
Push force
None of above
Drag force
Low-speed wind turbines, such as the traditional Savonius rotor, rely primarily on drag forces created by wind resistance against their concave surfaces. Unlike high-speed lift-based turbines, drag-based designs capture wind energy through a pressure differential rather than aerodynamic lift generation.
Low-speed wind turbines, such as the traditional Savonius rotor, rely primarily on drag forces created by wind resistance against their concave surfaces. Unlike high-speed lift-based turbines, drag-based designs capture wind energy through a pressure differential rather than aerodynamic lift generation.
FdragтАЛ=21тАЛ╧БACdтАЛv2 тАФ Force exerted by wind based on drag coefficient CdтАЛ
T=FdragтАЛ├Чr тАФ Torque generation in drag-based rotors
The turbine blade presents a higher surface area to the wind on one side compared to the other. As the wind strikes the concave surface, it generates a significant drag force that pushes the blade forward, while the wind flows more smoothly over the convex side. Because drag force is proportional to the projected area and wind velocity, these turbines can start rotating at very low wind speeds, making them ideal for high-torque, low-RPM applications.
Drag-based turbines are characterized by high starting torque.
They operate at lower tip-speed ratios (TSR) compared to lift-based turbines.
Savonius rotors are the most common example of drag-based designs.
They are insensitive to wind direction, eliminating the need for complex yaw systems.
Capable of operating in turbulent or low-speed wind conditions.
Simple mechanical construction and low maintenance requirements.
Low aerodynamic efficiency compared to lift-based (aerofoil) turbines.
Higher material usage per unit of swept area.
Water pumping systems.
Small-scale auxiliary power in urban environments.
Anemometers for wind speed measurement.
Lift-based turbines (like the HAWT or Darrieus VAWT) use the Bernoulli principle to generate lift, which is far more efficient but requires higher start-up wind speeds.
Option B is incorrect because lift force designs (like propeller types) require higher blade velocities relative to wind speed to generate torque.
A is correct тАФ Lowest speed wind turbines utilize drag forces because they maximize the pressure differential on the blades at low air velocities.
In competitive exams, remember: Drag-based = High torque/Low speed; Lift-based = High speed/Low torque.