Join 60,000+ competitive exam aspirants
Material used for ground wire is
Aluminum
Galvanized steel
Cast iron
Stainless steel
Galvanized steel
The ground wire (also known as the earth wire or shield wire) is installed at the top of transmission towers to protect the overhead conductors from direct lightning strikes. Galvanized steel is used as the material for these wires due to its high tensile strength, which allows it to withstand significant mechanical tension, and its corrosion resistance provided by the zinc coating.
The ground wire (also known as the earth wire or shield wire) is installed at the top of transmission towers to protect the overhead conductors from direct lightning strikes. Galvanized steel is used as the material for these wires due to its high tensile strength, which allows it to withstand significant mechanical tension, and its corrosion resistance provided by the zinc coating.
RfтАЛ=2╧Аr╧БтАЛ тАФ where RfтАЛ is tower footing resistance and ╧Б is soil resistivity
TmaxтАЛ=8dwL2тАЛ тАФ where TmaxтАЛ is tension and w is weight per unit length
The ground wire works on the principle of shielding; it intercepts lightning strokes before they hit the phase conductors. By connecting the ground wire to the transmission tower structure, the lightning current is safely dissipated into the earth through the tower's footing resistance. The high mechanical strength of galvanized steel is essential to maintain the required sag and tension over long spans between towers.
Ground wires do not carry load current; they serve only for protection.
They are placed at the highest point of the tower to create a protection angle, usually around 30┬░.
Galvanized steel is preferred over copper or aluminum because it is cheaper and has higher tensile strength.
The zinc coating (galvanization) protects the steel from atmospheric corrosion.
High mechanical strength to support long spans
Excellent resistance to environmental corrosion
Cost-effective material choice
Low sag characteristics
Higher electrical resistance compared to Aluminum or Copper
Not suitable for carrying electrical power current
High voltage overhead transmission lines
Distribution lines for lightning protection
Substation shielding structures
Aluminum is commonly used for the phase conductors due to its high conductivity, but it lacks the structural strength required for shielding wires.
Cast iron is brittle and unsuitable for high-tension overhead applications.
Stainless steel is often too expensive for large-scale transmission projects compared to standard galvanized steel.
B is correct тАФ Galvanized steel is the standard material for ground wires due to its combination of high mechanical strength and corrosion resistance.
Always distinguish between conductors (which prioritize conductivity) and shield/ground wires (which prioritize tensile strength and durability).