Join 60,000+ competitive exam aspirants
Material used in overhead transmission line is
Steel-cored aluminum
Galvanized steel
Cadmium copper
All of above
All of above
Overhead transmission lines utilize different materials based on electrical conductivity, tensile strength, and weight requirements. ACSR (Aluminum Conductor Steel Reinforced) is preferred for long spans, galvanized steel for ground wires, and cadmium copper for specific contact applications requiring high mechanical hardness.
Overhead transmission lines utilize different materials based on electrical conductivity, tensile strength, and weight requirements. ACSR (Aluminum Conductor Steel Reinforced) is preferred for long spans, galvanized steel for ground wires, and cadmium copper for specific contact applications requiring high mechanical hardness.
S=8TWL2тАЛ тАФ Sag of transmission line where W is weight per unit length, L is span, and T is tension.
R=╧БALтАЛ тАФ Resistance formula relating material resistivity (╧Б) to physical dimensions.
The selection depends on the trade-off between conductivity (Copper/Aluminum) and mechanical strength (Steel). ACSR works by using a steel core to bear mechanical tension while the outer aluminum strands carry the current, minimizing the weight-to-strength ratio. Cadmium copper is an alloy that increases the recrystallization temperature and tensile strength of copper, essential for trolley wires and high-vibration environments.
ACSR provides the best strength-to-weight ratio for long-distance power transmission.
Galvanized steel is widely used for earth wires due to high strength and corrosion resistance.
Cadmium copper is used when high tensile strength and wear resistance are prioritized over pure conductivity.
ACSR reduces the number of towers required due to its high strength.
Copper alloys offer superior mechanical endurance in trolley systems.
Pure copper is heavy and expensive for very long spans.
Steel-cored conductors are susceptible to bi-metallic corrosion if not treated.
ACSR: Bulk power transmission lines.
Galvanized Steel: Overhead earth wires/shield wires.
Cadmium Copper: Electric traction and trolley wires.
ACSR is the industry standard for EHV transmission.
Cadmium copper adds about 0.5% to 1.5% cadmium to improve mechanical properties.
D is correct тАФ All listed materials are standard choices depending on the specific mechanical and electrical constraints of the transmission project.
Remember that while Aluminum has lower conductivity than Copper, the ACSR design allows for larger spans, which significantly lowers the total project cost in transmission systems.