Join 60,000+ competitive exam aspirants
Overfeed stoker includes
Traveling grate
Chain grate
Spreader
All of above
All of above
Overfeed stokers are mechanical firing systems for boilers where coal is fed onto the fuel bed from above or through a mechanical device at the furnace front. Traveling grate, chain grate, and spreader stokers all operate on this principle of distributing coal over the firebed surface.
Overfeed stokers are mechanical firing systems for boilers where coal is fed onto the fuel bed from above or through a mechanical device at the furnace front. Traveling grate, chain grate, and spreader stokers all operate on this principle of distributing coal over the firebed surface.
EthтАЛ=╬╖├ЧHVcoalтАЛ тАФ Represents the theoretical thermal energy release based on boiler efficiency and coal heating value.
AsтАЛ=qmfтАЛтАЛ тАФ Represents the grate area required, where mfтАЛ is fuel burn rate and q is heat release rate per unit area.
In overfeed stokers, coal is introduced onto the grate where combustion air is supplied from below (underfeed air). The fuel bed moves or is distributed across the furnace, allowing for controlled burning as the fuel moves from the feed end to the ash discharge end. The combustion process is governed by the rate of coal feed and grate speed, ensuring efficient burning of various grades of bituminous coal.
Overfeed stokers rely on gravity and mechanical movement to distribute fuel.
Combustion occurs as coal travels across the grate, transitioning from drying/ignition to devolatilization and char burning.
These systems are typically used for industrial-scale steam generation.
Capable of burning a wide range of coal sizes and types.
High reliability in continuous steam production.
Relatively simple mechanical design compared to pulverized coal systems.
High excess air requirement compared to oil or gas firing.
Potential for clinker formation if grate cooling is inadequate.
Limited response time to sudden load fluctuations.
Medium-sized industrial power plants.
Process heating in sugar mills and paper industries.
Retrofitting older boiler systems for solid fuel flexibility.
Spreader stokers combine features of suspension burning and overfeed firing.
Traveling and chain grates are classified as mass-burn overfeed stokers.
Option D is correct because all mentioned types are standard variants of overfeed firing configurations.
D is correct тАФ All the listed types (Traveling grate, Chain grate, and Spreader stokers) are specific mechanical configurations that function as overfeed stokers.
When analyzing furnace types, always distinguish between overfeed (fuel fed from above) and underfeed (fuel pushed from beneath) to identify combustion characteristics correctly.