Join 60,000+ competitive exam aspirants
Phase modifier is normally installed in case of
Short transmission line
Medium transmission line
Long transmission line
Any length of transmission line
Long transmission line
A phase modifier, typically a synchronous condenser, is installed in long transmission lines to control voltage levels by providing or absorbing reactive power. Since long lines experience significant voltage drops due to inductance and line charging (Ferranti effect), reactive power compensation is essential to maintain a stable voltage profile.
A phase modifier, typically a synchronous condenser, is installed in long transmission lines to control voltage levels by providing or absorbing reactive power. Since long lines experience significant voltage drops due to inductance and line charging (Ferranti effect), reactive power compensation is essential to maintain a stable voltage profile.
Q=V2╧ЙC тАФ Reactive power generated by line capacitance
VreceivingтАЛ=VsendingтАЛтЛЕcos(╬▓l)тИТIsтАЛZcтАЛтЛЕsin(╬▓l) тАФ Voltage profile equation for long lines
The phase modifier acts as a variable reactive power source. When operated as an over-excited synchronous motor, it supplies leading reactive power (+Q) to compensate for lagging line drops, boosting the voltage. When under-excited, it absorbs lagging reactive power (acting like an inductor) to mitigate the Ferranti effect during light load conditions, preventing excessive voltage rise.
Used specifically for long transmission lines (typically > 240 km).
Acts as a dynamic reactive power compensator (synchronous condenser).
Helps in maintaining the voltage profile during varying load conditions.
Required to counteract the Ferranti effect at no-load or light-load conditions.
Dynamic and continuous control of reactive power.
Can provide both leading and lagging reactive power.
Improves system stability and voltage regulation.
High maintenance cost due to rotating parts.
Higher power losses compared to static capacitors.
Complex control circuitry required.
High Voltage Long Transmission Lines.
Grid stability at major receiving stations.
A transmission line is defined as 'long' if its length exceeds 240 km or if the operating voltage is above 150 kV.
Options A and B (Short/Medium lines) are generally compensated by shunt capacitors or reactors which are static, as dynamic control is less cost-effective for these lengths.
C is correct тАФ Phase modifiers are installed in long transmission lines to regulate voltage by providing or absorbing reactive power based on line conditions.
Always remember: Short lines are compensated by capacitors, but Long lines require dynamic compensation like Synchronous Condensers or FACTS devices because of the distributed nature of line constants.