Join 60,000+ competitive exam aspirants
Potential sites for wind generation are those having energy density of
25 - 50 W/m┬▓
50 - 100 W/m┬▓
100 - 200 W/m┬▓
Greater than 200 W/m┬▓
Greater than 200 W/m┬▓
Wind energy density, also known as wind power density, is a measure of the available energy potential at a specific site. For a site to be commercially viable for utility-scale wind power generation, it typically requires a power density greater than 200 W/m┬▓ at the standard wind turbine hub height.
Wind energy density, also known as wind power density, is a measure of the available energy potential at a specific site. For a site to be commercially viable for utility-scale wind power generation, it typically requires a power density greater than 200 W/m┬▓ at the standard wind turbine hub height.
P=21тАЛ╧БAv3 тАФ The power available in the wind stream
PdтАЛ=APтАЛ=21тАЛ╧Бv3 тАФ Wind power density per unit area
Wind power density is proportional to the cube of the wind velocity. The power available in a wind stream is given by P=21тАЛ╧БAv3. Sites with energy densities greater than 200 W/m┬▓ generally correspond to wind classes where turbine operation is economically justifiable, ensuring high capacity factors.
Wind power density (W/m┬▓) is the primary metric for site selection.
Higher air density (╧Б)and higher wind speed (v) significantly increase power output.
Sites with < 100 W/m┬▓ are generally considered poor for grid-connected wind energy.
Wind power is highly sensitive to wind speed due to the cubic relationship.
Identifies locations for maximum energy harvesting.
Reduces uncertainty in project financial planning.
Helps in selecting optimal turbine technology.
Wind speed varies significantly with time and altitude.
Surface roughness affects the measured power density.
Wind farm site assessment.
Renewable energy resource mapping.
Economic feasibility studies for power plants.
Power density is calculated at specific heights (e.g., 50m, 80m, or 100m).
Options A, B, and C represent poor-to-moderate wind potential which is usually insufficient for large-scale utility generation.
D is correct тАФ Potential sites for wind generation are economically viable only when the wind power density exceeds 200 W/m┬▓.
Always remember the cubic law of wind power: doubling the wind speed results in an eightfold increase in power density (23=8).