Join 60,000+ competitive exam aspirants
or with email
Your Cart
SubtotalтВ╣0
TotalтВ╣0
Examoogle тАв User тАв info@examoogle.com тАв EE-2024-8821
Chapter 1 of 12 тАв Page 1 of 248ЁЯФТ Protected PDF тАв Watermarked
Join 60,000+ competitive exam aspirants
Push button switch use for?
Stair Case
Fan operation
Door Bell
All of the above
Door Bell
A push-button switch is a momentary contact device that completes a circuit only as long as the button is manually pressed. Once released, an internal spring mechanism returns the contacts to their normal state (normally open), making it ideal for signaling applications.
A push-button switch is a momentary contact device that completes a circuit only as long as the button is manually pressed. Once released, an internal spring mechanism returns the contacts to their normal state (normally open), making it ideal for signaling applications.
P=I2R тАФ Power dissipated in the bell coil during the push duration
W=тИл0tтАЛPdt тАФ Energy consumed for a pulse of duration t
When the operator exerts physical force on the actuator, the internal contact spring is compressed, bridging the electrical terminals to close the circuit. As soon as the force is removed, the stored mechanical energy in the spring pushes the actuator back to the original position, interrupting the circuit flow. This transient action is essential for doorbell systems where the circuit is energized only for the duration of the bell chime.
Push buttons are categorized as N.O. (Normally Open) or N.C. (Normally Closed) types.
The transient nature of the switch prevents the continuous flow of current through sensitive inductive loads like doorbells.
They are distinct from latching switches that maintain their state after the physical action is removed.
Provides precise control over timing of the signal
Simple mechanical construction leading to high reliability
Safety (prevents accidental long-duration operation)
Not suitable for applications requiring continuous 'ON' states
Requires manual intervention for every operation cycle
Door bells
Emergency stop buttons
Momentary signal inputs for PLCs
Reset buttons
Staircase wiring typically uses two-way (SPDT) switches to allow control of a load from two different locations, not push-buttons.
Fan operation usually requires a continuous ON/OFF toggle switch or a regulator for speed control.
C is correct тАФ a push-button switch is a momentary contact device specifically suited for temporary signals like those required to trigger a doorbell chime.
Always differentiate between 'Latching' (stays in position) and 'Momentary' (spring return) switches, as this is a common trap in MCQ exams regarding control circuit logic.